Top 6 Best Pwm Fan Controller

CABLE MANAGEMENT Case Fan Hub can be placed in housing, it's connected to motherboard with one cable, you can do without many additional cables and lay them freely in the invisible part of housing. SYNCHRONOUS FAN CONTROL Your set PWM signal is passed on synchronously to all fans connected to the Case Fan Hub, the RPM of the first fan slot are read out and returned to your system. EXPAND YOUR VENTILATION Even if you don't have enough fan headers on your mainboard, the case fan hub expands your system by 9 more case fan slots. EXTERNAL POWER SUPPLY The fans are powered directly from your power supply via Sata Power, there is no voltage loss at the fan speed and smooth, smooth operation is made possible. TECHNICAL DETAILS Output 10 x 4-pin PWM Socket, Output Current up to 1 A per Port, Input SATA Power 4-pin Fan Header, Input Current up to 4.5 A, Dimensions 55.6 x 86.3 x 14.3 mm, Weight 50 g.

Compact, highly flexible controller for 4-pin PWM fans. Works as a manual speed reducer or in tandem with the automatic motherboard fan control achieve truly quiet operation, even with high-speed PWM fans such as Noctuas industrialPPC series. No stop mode prevents the fan from falling below a speed of 300rpm in order to avoid BIOS fan errors. Includes a 3-way splitter cable for controlling up to 3 fans simultaneously. 6-year manufacturers warranty.

This is a PWM fan speed controller. It can only control 12V four-wire fans that support PWM speed regulation. For example, many 12V four-wire chassis or CPU fans cannot control 2-3-wire fans.. If the speed of the fan changes and the direction of adjustment is opposite, it means that the fan is a reverse-sequence fan, and the PF setting point needs to be short-circuited with solder, and the power must be turned off before operation to avoid damage The short-circuited PWM signal changes in the reverse direction with the adjustment, and the reverse-sequence fan can realize forward adjustment.. Pay attention to the positive and negative poles and the power supply voltage. After the power supply fan is connected, it can be used. The potentiometer is turned off counterclockwise to the end, and the clockwise end is the maximum output. A separate small adjustable resistor starting speed adjustment on the board is used to adjust the speed of the just-open position.. Fan current 3A this current is limited by switches and connectors.For fans over 3A, connect a large current fan method the positive and negative poles of the power supply of the fan can be connected to the power supply, the positive and negative poles of the fan are connected to the power supply separately, and the negative pole of the fan is connected to the negative pole of the board speed measurement and control are connected to the board .. Consumption less than 20mA without fan PWM signal model 0-5V 25Khz PWM signal output range 0 to 100 Start of PWM adjust range 0 to 60 Output interface 2510-4P, 2.54mm space Size 2620mm, knob screw extension 15mm installation opening 7mm.

FunctionPC 8 Channels Fan Hub Reduce speed to reduce noise power consumption when computer parts are free. Increase speed to reduce computer part temperature when computer parts are busy.. Knob Adjust4 Knob Cooling Fan Speed Controller , This cooling fan hub is equipped with the independent speed controller.. Material4 Knob Cooling Fan Speed Controller adopts plastic and metal materials, durable, reliable, with low loss and low heat.. UniversalWidely used for PC computer water cooling system, easy to install.Fan Interface 4PIN 3PIN Can be connected.Power Supply Interface 4Pin interface.. Save spaceSinLoon PC 8 Channels Fan Hub The governor is installed in the PCI position of the chassis, which is convenient for installation and does not take up space..

It is a PWM 4-Wire Fan temperature controller.It can be used for industrial fans.. Support EC four-wire fan control. Support low temperature shutdown fan. Wide voltage operation. SHOP WITH CONFIDENCE To Provide You With the Highest Quality Service, If You Have Any Question, Please Feel Free to Contact Us.We Will Provide After-sales Service Until You Are Satisfied..

Circuit load capacity maximum current per output 5A, the bus currents up 9A. Output Range The first channel 20 -100, or 40 -100 TFL ON. Working voltage DC12V. Stall alarm minimum speed 700-800 rpm. Temperature probe parameters 50K B 3950.

Supports all internal 12V 5A fans, synchronous rectified output, high efficiency, no need for additional heat sinks even for high current operation.. Multiple fans can be used in parallel total current does not exceed 5A, support automatic temperature control and air cooling speed control, temperature control speed has four temperature zone settings, widely used.. It can be turned on with the three-wire fan monitoring function stall warning.. Circuit load capacity 5A for each output and 8A for bus current.. Output range 20-100 for the first channel, or 40-100 for the first channel TFL ON, 10-100 for the second channel and the third channel. Note The above range is only applicable to the PWM range, the actual control effect will vary depending on the fan.

Power up to 10 PC fans from a Single 4-Pin Motherboard PWM Fan Header.Note Max current limit is 3A in total, check the spec of fan first.. In the hub interfaces, the White interface of FAN1 is the CPU fan dedicated interface with speed detection function. Since the mainboard can only receive one rotation speed signal, the remaining nine conventional fan interfaces have the PWM function, but no speed signal.. There is EVA double-sided adhesive in the package, which can be easily affixed to a flat place. Also a fixing screw hole in the middle of the PCB to facilitate fixing to a part of the chassis.. Direct computer power supply to reduce the mainboard loading pressure, and PWM temperature control line separated from mainboard to achieve both of power supply and temperature control.. If 3-pin fans are connected to this fan hub, this fan hub CANNOT give them extra PWM function. They will run at FULL SPEED..

Adjustable duty cycle 0-100. Maximum output power 30W. Maximum continuous output current 2A. Input voltage DC 2.2V-15V output voltage 1.8V-15V. Equipped with a 2A self-recovery fuse, which will automatically disconnect if the current is too large, and will automatically recover after the fuse cools down.