Click here to learn more about these products.
Self-Supporting Cone 04 Pyrometric Cones for Monitoring Ceramic Kiln Firings (Pkg/25)
Cone 04 is around 1940 F. Orton cone o4 is used for firing greenware. Low fire ceramics bisque to 04 glaze to 06.
Self-Supporting Pyrometric Cones for Accurate Firings in Industrial, Pottery and Hobby Kilns - Cone 6 (Pkg/25)
The number of this cone is 6 which bends at an approximate temperature of 2232 F, depending on firing conditions. Self-Supporting Pyrometric Cones are used on a shelf inside a kiln or in a kiln sitter to determine when a firing is complete, if the kiln provided enough heat or if there was a problem during the firing. Orton cones are made from carefully controlled compositions so that they bend in a repeatable manner over a very small temperature range. The cone tip sags until it reaches a point level with the base indicating the kiln has properly fired. Cones have been used in ceramic firings for more than 100 years and Orton has the history and experience to provide the very best product.
Pyrometric Cones For Monitoring Ceramic Kiln Firings-Cone 6 (1 Pkg/50)
Usable in cone holders or kiln sitters. Most accurate way to control ceramic firing. Consistent results. Orton has been manufacturing since 1896.
Pyrometric Cones For Monitoring Ceramic Kiln Firings-Cone 05 (1 Pkg/50)
Pyrometric Cones For Monitoring Ceramic Kiln Firings-Cone 06 (1 Pkg/50)
Usable in cone holders or kiln sitters. Most accurate way to control ceramic firing Consistent results. Orton has been manufacturing since 1896. Please note that the cones can come in pairs that need to be split apart. The box will come in 25 sets that when split apart is 50 cones. This is done by the manufacturer to reduce the number of cones broken during shipping.. small cones.
Self-Supporting Cone 06 Pyrometric Cones For Monitoring Ceramic Kiln Firings (Pkg/25)
Fixed Mounting Height and angle. No need for cone holder. Consistent results. Most accurate way to control ceramic firing. Orton has been manufacturing since 1896.
Self-Supporting Pyrometric Cones for Monitoring Ceramic Kiln Firings-SSB 05 25 Pack
Fixed mounting height and angle. No need for cone holder. Consistent results. Most accurate way to control ceramic firing. Orton has been manufacturing since 1896.
Pyrometric Cones For Accurate Firings In Industrial, Pottery And Hobby Kilns-Cone 04 (Pkg/50)
Usable in cone holders or kiln sitters. Most accurate way to control ceramic firing. Consistent results. Orton has been manufacturing since 1896.
Orton small pyrometric bars for the kiln sitter cone 04
Convenient. Cone 04 is for Bisquing Lowfire clay.
Pyrometric Cones for Accurate Firings in Industrial, Pottery and Hobby Kilns-Cone 06 (Pkg/50) (1)
The number of this cone is 06 which bends at an approximate temperature of 1830 F, depending on firing conditions. Pyrometric Cones are used on a shelf inside a kiln or in a kiln sitter to determine when a firing is complete, if the kiln provided enough heat or if there was a problem during the firing. Orton cones are made from carefully controlled compositions so that they bend in a repeatable manner over a very small temperature range. When used in a cone holder the cone tip sags until it reaches a point level with the base indicating the kiln has properly fired. Cones have been used in ceramic firings for more than 100 years and Orton has the history and experience to provide the very best product.
Best Choice
Best Value
