Top 6 Best Safety Spotter Arms

Fit 2-inch x 2-inch power racks Yes4All spotter arms are compatible with 2-inch x 2-inch power racks with 1-inch or 58-inch holes BUT NOT ALL PLEASE CHECK YOUR RACK DIMENSIONS BEFORE PURCHASING TO AVOID ANY UNWANTED RETURN. Heavy-duty Built strong enough to withstand up to 1000 pounds, these safety spotter arms can safely hold heavy loads.. Premium quality Yes4All safety catches are made of heavy-duty square steel. This tough design will prevent the spotter arms from corrosion and breaking apart and concurrently offer the needed security and grip when you work out with the power rack.. Full adjustability Easily adjust these spotter arms 2x2 to the desired height for your effective exercise training. Just twist, pull, and insert them into your preferred height.. Protective UHMW plastic pad These safety spotter arms are reinforced with the UHMW plastic pad to reduce noise and keep your barbell free from damage..

Only Compatible with 2X2 power rack. SAVE YOUR SPACE This pair of weight plate holders is the perfect alternative for bulky And space-consuming weight plate trees. The holders are especially ideal for home gym, garage gym, or commercial fitness facilities with limited space. STRONG CONSTRUCTION Made of solid stainless steel, Yes4All Weight Plate Holders can support up to 300 per holder And 600 lbs. a pair of holders combined. Hard construction ensures your weight plates safely store off the floor. DIMENSIONS 11. 4 L x 4. 5W x 2. 4 H 5. 5 lbs. pair. Designed to fit 2 x 2 square tube power racks with 1 hole And 2 diameter Olympic Weight Plates. Sleeve length is up to 9 extra-long so you can have more room to put your weight plates. EXTRA SAFE DESIGN EASY TO USE The sturdy pin set-up keeps everything in place. Just slide pin into power rack's hole and swing down to lock in place. This smart design makes it more convenient for loading and unloading the weight plates, too. 30 DAYS RETURN 1 YEAR WARRANTY Our high-quality product comes with 1-year war and 30-day return to give you the best satisfactory for every purchase.

Fit 2-inch x 2-inch power racks Yes4All spotter arms are compatible with 2-inch x 2-inch power racks with 1-inch or 58-inch holes BUT NOT ALL PLEASE CHECK YOUR RACK DIMENSIONS BEFORE PURCHASING TO AVOID ANY UNWANTED RETURN. Heavy-duty Built strong enough to withstand up to 1000 pounds, these safety spotter arms can safely hold heavy loads.. Premium quality Yes4All safety catches are made of heavy-duty square steel. This tough design will prevent the spotter arms from corrosion and breaking apart and concurrently offer the needed security and grip when you work out with the power rack.. Full adjustability Easily adjust these spotter arms 2x2 to the desired height for your effective exercise training. Just twist, pull, and insert them into your preferred height.. Protective UHMW plastic pad These safety spotter arms are reinforced with the UHMW plastic pad to reduce noise and keep your barbell free from damage..

SPECS Sold as a pair. Please note, these spotter arms are ONLY FOR USE WITH CAP Barbells FM-905Q series and FM-CS7000F. Dimensions for each spotter arm are 17.75 L x 2 W x 8 H. Includes 30-day limited manufacturer warranty. BUILT TOUGH Made with 10 11-gauge steel welded to a 3-sided face plate, these safety catches offer the security grip needed when using the CAP Barbell FM-905Q Series FM-CS7000F rack. Peg diameter is 38 or 9. 5mm. Fits on 2x2-inch tubular frame. HEAVY-DUTY With a maximum static weight capacity of 500 pounds and 10 11-gauge steel construction, these catches safely support heavy loads. Durable powder coat finish helps prevent rust and corrosion. Catches sold separately not included with rack.. ADJUSTABLE Easily adjust safety catches to preferred height for squats or bench presses. Simply twist pull spotter arm insert into desired height. Reinforced with rubber padding to reduce weight room noise protect the finish of your bar.. DEPENDABLE 16-inch length of these spotter arms provides support needed when going heavy on your CAP FM-CS7000F or FM-905Q Color Series Power Rack Exercise Stand. Welded end caps prevent bar from rolling or slipping off the safety arms..

Allows you to safely lift alone without risk - simply drop your loaded barbell onto the spotter arms if you feel you cannot complete a motion. Protective UHMW plastic coating, protects your barbell from damage. Signature Fitness brand logo. Built from 11 gauge steel - can withstand up to 1,000lbs. Fits Signature Fitness racks and 3 x 3 racks with 58 pin diameter - please measure your rack before buying if you are not using a Signature Fitness rack.

APPLICATIONPower rack safety bar extension can be compatible with 2 x 2 inch tube power rack with 1inch hole.. EASY HEIGHT ADJUSTMENTEasy to insert and rotate the safety catches to different height. Just attach the safety spotter arm in place for bench pressing overhead press and squat.. EXTENED VERSION16 inch length of these spotter arms provide a lot of space to exercise and enough support you need. The end prevent bar from rolling or slipping off the safety arms.. MORE SAFETYThe safety bar is equipped with uhmw padded plastic layer to prevent scratching barbell and reduce noise when exercising. While the safety pin offer extra strength and safety for the arm. HEAVY DUTYConstructed of heavy steel with a maximum weight capacity of 500 pounds, safely support heavy loads. Covered with black powder finish, hard to corrosion or rust..

STURDY TRIPOD BASE 12-Gauge Steel Frame for extra stability while lifting heavy loads Rubber base caps prevent movement of bench during exercise and to better protect gym floors.. DUAL-LAYERED PAD- High density, dual-layer, vinyl bench pad designed for optimal comfort under intense stress. 47.5 x 11 x 2.5 Tapered back pad design 9.5 allows the shoulders and arms a better range of motion while performing a bench press.. STRIKER PLATE- Dual position solid steel striker plate positions for bar support. Powder coated to prevent scratching after repeated use. Height from the bench to first bar catch, 16 Height from bench to second bar catch, 21.. SAFETY CATCH- Includes adjustable safety catches in the event the lift cannot be completed 7 position safety catch allows for a 6 adjustment range, up or down. Heavy duty built-in spotter stand for added safety and protection 18.5 x 12 .. ADDITIONAL- Meant for home gym and light-commercial use. Max weight load of 500 lb not including user. 3-year frame warranty, 2-year bench pad warranty, 1-year popper pin warranty. Arrives in 2 separate boxes..

Spotter Arms, Pair. Designed to fit 2 x 2 square tube power racksPower Cage with 1 hole. STRONG AND STURDY CONSTRUCTION Heavy duty design up to 500 Pounds weight capacity. EASY TO USE Easy to insert and lock-in design, just slide pin into power rack's hole and swing down to lock in place. Great for organizing your plates.

Allows you to safely lift alone without risk - simply drop your loaded barbell onto the spotter arms if you feel you cannot complete a motion. Protective UHMW plastic coating, protects your barbell from damage. Signature Fitness brand logo. Built from 11 gauge steel - can withstand up to 1,000lbs. IMPORTANTFits Signature Fitness racks and all 3 x 3 racks with 58 pin diameter - please measure your rack before buying if you are not using a Signature Fitness rack.

Compatable only with the GRIND Fitness Alpha1000 Squat Rack. STRENGTH Built strong enough to hold weights up to 500lb.. PROTECTION These safety catch arms are fully powder coated for the strongest durable to protect against scrapes and scratches. Additional rubber stripping was added to the top for added protection to protect both the spotter arms and your barbell knurling.. HOME GYM Spotter arms are a must have in a home gym. These help keep you safe during movements like bench press and leg squats.. BRAND The GRIND Fitness makes durable gym equipment for home at a great price. Build your home gym with all the other workout equipment we have to offer such as weight benches, free weights, barbells and more..

Compatible with T-3 Series Power Racks. Fully lined with UHMW to protect your barbell from damage. Included 2 quick pins for easy adjusting. Laser-cut TITAN logo. No hardware required.

Compatible with 2 x 2 in posts with 2132 inch holes. Only for posts that have holes in the front back, not suitable for posts that only have side holes. Spotter arms are designed to offer added safety when lifting weights by catching barbells if dropped. The arms are made of thick durable steel and their black coating provides long lasting protection. Easy to insert, lock in place and remove, these arms allow for quick adjustments to your rack setup.

LIFT HEAVY, LIFT SAFELY Our Safety Spotter Arms have a 600lb weight capacity for the pair. Go ahead and set those record-setting lifts even when training solo - our gear's got you spotted.. EASILY ATTACH TO YOUR RACK IN SECONDS Simply slide the pins on the spotter arms into your rack and you're ready to start lifting. The adjustable height feature allows you to set the spotter arms at your preferred position, ensuring they are at the ideal height to catch the barbell in case of a failed lift or loss of control... EXTRA SPACE FOR SQUATS The spotter arms are 22 in length, giving you almost 2 feet of safe space between you and the rack for when you're lifting. This extra space will come in handy when using them for squats and bench press.. KEEPS YOUR BARBELL IN NEW CONDITION If you fail on you're lift, not a worry Our 2x3 Safety Spotter Arms have UHMW Plastic Liners to protect your bars from being damaged when dropped.. BUY WITH CONFIDENCE Here at Fringe Sport, we pride ourselves in providing you with great gear at a great price with world-class customer service, which is why all of our equipment is backed by a 365 day satisfaction guarantee with FREE returns. We stand behind our products 100.