Top 6 Best Sata To Ide Converter

for Desktop 3.5 Hard Disk Drive , Works with all IDE 40Pin Drives up to 1000GB. Supports IDE 66100133MBs . Adapter is good for up grading an old computer with 3.5 inch IDE HDD to a new 3.5 inch SATA HDD or SSD.. No need for an extra power supply.. No driver needed, plug and play, unit is not hot swappable. Compatible with DOS, Windows 9898SE, Me, 2000, 2003, XP, Vista, Windows 7 Linux.. 3.5 inch IDEPATA 40Pin HDD Drive to SATA Female Converter Adapter PCBA.

Connect a SATA device to an IDEATA motherboard or controller card. Complete hardware solution no software required. Support for 48-bit Logical Block Addressing LBA. Compliant with SATA revision 1.0 specification. Supports SATA IIIIII 1.536Gbps drives.

3.5 inch SATA HDD Drive to IDE 40Pin mainboard converter Board. Works with all 2.53.5 SATA Drives.. Supports IDE 66100133MBs. With Master and slave jumper.. No driver needed, plug and play, unit is not hot swappable..

Convert all SATA devices to IDE. Data transfer rate up to 3.0 Gbps. Two LED indicators for power on green and HDD red.

Supported HDDSSDFIDECO IDE and SATA adapter is compatible with 2.53.5 SATAIDE hard drives. It can support the connection of 3 hard drives simultaneously one 2.5 IDE, one 3.5 IDE, one 2.53.5 SATA.. Compatible SystemFIDECO hard drive reader is widely compatible with Windows, Mac OS, and Linux. Just plug and play No driver or software is needed. Maximum 5Gbps Super SpeedFIDECO hard drive adapter is engineered with USB 3.0 port and can offer data transfer speeds up to 5Gbps. It can be also backward compatible with USB 2.01.1. Data transfer has never been so much easier and faster.. Easy Set-upSimply insert your hard drive, connect the power adapter and USB cable, and then turn on the device by pressing the power switch. Note For 3.5 IDE HDD, you need to connect the 4-pin power cable.. Warm NoteFor new hard drive, please go to Disk Management to initialize it first, and then your hard drive can be recognized. If 2.5 and 3.5 IDE hard drives are connected simultaneously, you need to set jumper. The default master is 2.5 IDE hard drive, so you need to set jumper for 3.5 IDE hard drive and set it to slave..

PRO IDE HARD DRIVE CONVERTER - Dual-Head IDE Connector 40pin and 44pin plus one SATA II Connector. Support SATA 2.53.5 HDD up to 10 TB, IDE 2.53.5 HDD, DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD RW Optical Drive. Allowed to operate three hard disk drives simultaneously.. TYPE C 5GBPS USB 3.0 - Super speed Data transfer, backward compatible with USB 2.01.1. Support Windows XPVista7810 and Mac OS.. STABLE POWER SUPPLY - Included 12V 2A power cable. 4PIN Power Cable is designed for 3.5 IDE drive.. PLUG AND PLAY - Automatic Sleep Mode after 30 minutes of inactivity. Support Hot Swapping. OnOff Switch for HDD protection. LED light shows Power and Activity status.. WHAT WE OFFER - SATAIDE to USB 3.0 Adapter Hard Drive Cable x1, 12V 2A Power Adapter x1, 4PIN Power Cable x1 24h-friendly customer service and email support..

Universal CompatibilityThe IDE and SATA adapter can support 2.53.5 SATAIDE HDDSSD DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVDRW optical drive. It is also widely compatible with Windows, Mac OS, and Linux.. Built-in USB C PortThe hard drive reader is built in with type C port, and the package comes with 2 USB cables one USB C to USB C cable and one USB A to USB C cable. You can use the device to connect to your desktop or laptop directly. It can also support OTG function for cellphones with type C port.. 5Gbps Fast SpeedThanks to the USB 3.2 Gen 1 type C port, the maximum transfer speed can reach 5Gbps. It's easy to transfer large files within seconds. It can be also backward compatible with USB 2.0.. Easy to OperateThree hard drives can be connected simultaneously one 2.5 IDE, one 3.5 IDE, and one 2.53.5 SATA. Just plug and play without driver.. Smart IndicatorsFor our hard drive adapter, there are 3 indicators in total. The white one is power light the first blue one is SATA light the second blue one is IDE light. The respective HDD light will flash during data reading or writing, so it is much easier for you to know the working status of the device..

Support 2.5 3.5 SATA HDD and SSD 2.5 3.5 IDE HDD DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD RW Optical Drive. Dual-Head IDE Connector 40pin and 44pin plus one SATA II Connector.. Allow to operate three HDDs Simultaneously. Data transfer rates up to 5 Gbps, backward compatible with USB 2.01.1.. Included 12V 2A power cable is for providing stable electricity supply. Note 4PIN Power Cable is designed for 3.5 IDE drive, SATA drives are not applicable and unnecessary.. Plug and play Hot Swap One Touch Backup function OnOff Switch for HDD protection. LED light shows power and activity status.. What we offer USB 3.0 to IDESATA Adapter, USB 3.0 Cable, 4PIN Power Cable, Power Adapter, OTB Software CD, 24h customer email support..

Universal Hard Drive Adapter SATA IDE to USB adapter allows connect your SATA IDE device to computer as an external hard drive via USB 3.0. Compatible with 2.53.5 IDESATA hard drives and DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD RW Optical Drive. This is a perfect tool to duplicate, copy, backup, or transfer large amounts of data from one drive to another.. Transfer Rate up to 5Gbps SATA to USB 3.0 adapter supports super speed USB 3.0 enables data transfer rates of up to 5Gbps, backward compatible with USB 2.0high-speed 480 Mbps USB 1.1full-speed 12 Mbps standards. The actual transmission speed subjects to the setting of the device connected .. Wide Compatibility Hard drive to USB adapter support Operate Systems Support Windows XPVista7 88.110, Mac OS 10 or higher, Linux. Compact body design, Support Plug, and play hot swap, OnOff power Switch for Hard drives protection.. Support Hard Drives Capacity up to 6TB Hard drive adapter has a SATA III connector and two IDE connectors 40pin and 44pin. we Provide a 4pin power cable for a 3.5 IDE drive, Tips Some IDE hard drive is old, you need to set a jumper to turn on the diskset the master disk and the slave disk.. Included 12V 2A Power Supply USB 3.0 to IDE SATA adapter included 12V2A AC power supply, for power up the 5V12V IDE devices usage, ensures SATA HDD can be connected well. 4pin power cable is designed for a 3.5 IDE drive LED light shows power and activity status..

This will allow you to install a newer SATA HDD in to an older PATAIDE system.. One Female SATA port, one Male PATA port 40-pin IDE, and one 4-pin Molex power connector.. Supports ATA 100133 Data transfer rate up to 3.0 Gbps.. Package Contents 1x Sata to Pata Adapter,cable not provided..