Top 6 Best Servo Tester

1.There are 3 modes to check servos or ESC. 2.Manual mode turn the knob with different speed, check the reaction time. 3.Neutral mode make the servo go back to the neutral point.. 4.Automatic window wiper mode make the servo swing like a window wipers in the biggest angle..

High SrecisionThe RC ESC tester used to compare the performance steering gear control of the steering servo output signal can be accurate to 2us 1 milliseconds 1000 microseconds. Button The Select Note the key switch function, circulation patterns 1. S-1 manual mode Manual 2.S-2-bit mode Neutral 3.S-3 automatic mode Automatic. Keys Pulse Width1. 50H analog servo signal cycle 20us frequency 50Hz, 2. 125H digital the steering gear a signal cycle 8us frequency 125Hz,3. 250H Digital Servo signal cycle 4us frequency 250Hz. Powerful Testing FunctionRC plane servo tester can test the steering gear is able to respond to subtle changes With PPM signal test function in the display. How To UseDigital or analog signal button selects the corresponding servo system and then plugs into the steering servo to avoid damage to the steering servo.

Aluminum shell, durable and lightweight, easy to operate buttons. A new upgraded servo tester.. 3 modes to check servos or ESC, manual mode, neutral mode, automatic window wiper mode, you can manage the servo tester as your need.. You can also connect 1-3 ESC to test and compare their reaction time respectively.. GT Power Servo Tester can connect 3 servos of the CCPM helicopters, adjust the helicopters and select servos, multi-function.. The device also can be used as a signal generator for electric speed controller ESC. With it, you can test your motor system without using a transmitter and receiver..

1, 4 Cell AA Battery Holder Case is a good option to supply the power for RC models such as for 18 110 116 RC Cars Trucks Crawlers only if it has interface for JR connector, very easy and convenient to use it. AA batteries are not included, you need prepare 4pcs AA Batteries by yourself.. 2, 4 Cell AA Battery Holder Case with Servo tester can be widely used to test the RC digital servos which is with JR plug as well, such as for model 9g micro servo, tiny 1.5g linear servo, FS90R servo, DS3225 digital servo, DS3218 digital servo etc.. 3, The red wire of the holder is to connect with of IN of the servo tester, and black wire is to connect with - of IN. The other side which marked OUT is to connect with servo, normally red wire is with , black or brown wire is with -, and the rest wire is with signal.. 4, What you will get is 1pc 4 Cell AA Battery Holder Case with JR Connector 2P Black Red Wire, and 1pc 3CH Digital Servo Tester. AA batteries and Servos not included in this listing.. 5, If you have any questions, pls feel free to contact us by clicking WISHIOT under the shopping cart and clicking Ask a question..

Dimension 76mm53mm2.99in2.09in Weight 37g 1.31oz. Use high-precision six potentiometers, which can control the corresponding six servos simultaneously. The 0th, 1st, 2nd and 3rd interface have over-current protection to avoid burning out servo due to over-current. The voltage that the controller require should correspond to the voltage required by a servo that you controlled. There is a small button under each knob of controller, press it, the servo will return to the center of the state, the knob can not control the servo rotation then press it, remove the center of the state, the knob can continue to control the servo rotation.

Multifunctional servo tester, aluminum shell, durable and lightweight, easy to operate buttons. 3 modes to check servos or ESC Manual mode, Neutral mode, Automatic ''window wiper'' mode. Can connect 1-3 servos simultaneously and test such as 1-3 servos consistency, can also connect 3 servos of the CCPM helicopters, adjust the helicopters and select servos. The battery holder case works great for RC, servo tester. Each case holds 4pcs AA batteries, with JR connector, easy to use. What you will get 1 X Servo Tester, 1 X 4 Cell AA Battery Holder.

Battery checker with built-in cell balancing, integrated servo tester and driver, and Spektrum Smart battery connectivity. Qualcomm 3. 0 compatible USB charge port with Quick Charge for compatible Android and IOS devices up to 12v and 2 amps. Easy to read full-color IPS LCD screen withuser-friendly touch interface. Center and test your servo endpoints easily with the integrated PWM output port.

The ST8 is a product for testing servos, with up to 28V voltage output, 8-channel signal output, current measurement, curve display and other functions.. 4 channels of programmable independent signal, 8 channels of signal output, accuracy of 1 ms.. 4 independent current acquisition, respectively, curve display.. Multiple measurement modes speed, count, step, linear.. Multi-language system, you can upgrade the language you need..

It is very convenient to detect and set the virtual bit, jitter and median of the server.Input DC 4.2-6.0v, Output signal 1.5ms 0.5ms.. The device also can be used as a signal generator for electric speed controller ESC.. There are 3 modes to check servos or ESC Manual mode turn the knob with different speed, check the reaction time.. Neutral mode make the servo go back to the neutral point.. Automatic window wiper mode make the servo swing like a window wipers in the biggest angle..

3 modes to check 1-3 servos or ESCs Manual modeNeutral modeAutomatic window wiper mode. Input power supply DC4.8-6V, It can be connected to 3 sets of servos or ESCs it is controlled by a single-chip microcomputer, with good stability and high precision. Most features All aluminum alloy shell, anodized. Can test analog and digital steering gear Can control ESC motor stepless speed regulation test And can test whether three steering gears are synchronized at the same time this function is mainly suitable for helicopters in CCPM mode steering gear. Please Note The servo tester couldn't slow down your servo directly, it is a device that puts out pulses to test a servo, you can use the existing control to run the servo. The default power on mode is manual modeuse the knob to control the angle.