Top 6 Best Shelix Cutterhead

This DW735 OEM cutterhead is machined slightly larger to give you a cutterhead that is the same size as the one you are removing. You will need to remove the inserts from the cutterhead prior to install, and then replace them after the cutterhead is in place.. Staggered, spiral carbide insert configuration provides a shear, rather than straight cut for a smoother finish and quieter operation.. Helical insert knife configuration breaks up chips, making dust collection easier.. Replace individual inserts when dull or damaged, rather than having to replace an entire expensive knife blade comes with 5 replacement inserts.. Made in the USA.

Cutterhead diameter is 0. 088 roughly 116 in smaller than the original OEM head to allow for installation without removing the carbide insertsC3 carbide cutters lasts an average of 10 times longer per side 4 sides 40x than traditional steel knives. Spiraled to break up chips for dust collection, shear to give clean cutting actionTrue helical cut slices the wood which greatly reduces noise and tearoutPocket for cutters makes replacing them easy and creates perfect alignment.

Made in the USA by Byrd these indexable carbide insert cutter heads are very well made and leave a great finish. The inserts are positioned along a spiral pattern and rotate at a slight angle for a shearing action that leaves a glassy smooth cut on the toughest. Each cutter head comes with included inserts plus 5 extras.

Made in the USA by Byrd, these indexable carbide insert cutterheads are very well made and leave a great finish. The inserts are positioned along a spiral pattern and rotate at a slight angle for a shearing action that leaves a glassy smooth cut on the toughest. Comes with all 30 inserts on the cutterhead, plus 5 extras.

Includes full manufacturer warranty.

HELICAL CUTTERHEAD WITH 27 INDEXABLE CARBIDE INSERTS. TWO-WAY TILTING FENCE Positive stops at 45 and 90 to handle bevel operations.. FRONT-MOUNTED ADJUSTMENT HANDWHEELS Make quick, easy, and accurate corrections.. EFFICIENT DUST REMOVAL Built-in dust chute with 4 port connects to your collection system.. STABILITY Heavy-duty, one-piece steel closed stand includes mounting tabs..

Motor 2HP, 120V, single-phase, 15A. Maximum stock width 13 in.. Maximum stock thickness 6 in.. Maximum cutting depth 18 in.. Cutterhead type spiral-style with 26 inserts. Cutterhead speed 10,000 RPM. Feed rate 26 FPM. Table size with extensions 13 in. x 33-14 in.. Dust port size 4 in. with 2-12 in. adapter included. Carbide insert size 14mm x 14mm x 2mm.

26 HSS Insert Cutters. featuring alternating cutter pattern and two-speed feed rate which produces a smoother cut surface. Part Number 25-135H.

UPGRADED CUTTERHEAD-The TJATSE 13 Helical Cutterhead is designed to replace the straight knife cutterhead on the DeWalt DW735 and DW735X Planers. Takes the performance of your Dewalt planer to the next level and cuts smoothly through your wood planing projects with ease.. CUT IMPROVEMENT-Helical cutter head features smaller which contact the wood and an angle shearing the fibers rather than tearing at them, the cutting performance is excellent and the slight bit of snipe that was getting with the straight knives is completely gone, the wood surface would be so much smoother.. AMAZING NOISE REDUCTION-The biggest difference of helical cutterhead is the noise reduction, the section cutting process makes the wood chips very fine, then the chip removal is easier. Energy saving and power saving, while reducing tear out more effectively than conventional straight-knife cutterheads.. LONG-TERM COST SAVING-56 Indexable carbide inserts included to produce a superior finish. Indexable carbide inserts are less prone to nicks and cracks over conventional HSS knives and 10 times longer than. If an insert dulls or gets nicked, simply rotate it to expose a new sharp edge or easily replaced, No need to take out all the blades, reduces shop down-time and cost saving.. BRAND QUALITY WARRANTY-Package included 1 x 13 helical cutterhead 56 x carbide inserts 56 x screws, 1x screw driver, one-year warranty which assures the unit is free from factory defects. The TJATSE Customer Service and Technical Support Teams are all days online for help..

Brand new 4 rows and 40 inserts. Outstanding finish compared to HSS straight knives. Chip out is nearly non-existent with spiral shearing action. Reduced noise. Improved dust collection. Extreme long life with 4-sided carbide insert knives that are easy to replace..