Top 6 Best Shimano Crank Tool

SMART DESIGN This tool is specially designed for removing the crank arm off the BB without taking off the pedals. Please watch the video in the listings for more details.. FIT SQUARE TAPER BB ONLY Special design for threads and square tapered crank arm. Does NOT fit ISIS or Octalink crankset.. HEAT TREATED Heat-treated high-quality steel constructed for long-time use.. RUBBER-COATED The rubber-coated long handle provides better leverage and a comfortable grip.. ORDER NOW, WORRY-FREE We're so confident about our product quality that we can provide a lifetime warranty Made in Taiwan..

COMPATIBILITY It fits two common fittings on adjustable cup-and-cone bottom bracket systems.. FOR 36MM FLAT CUP WRENCH One end fits fixed cup with 36mm wrench flats.. ADJUSTABLE PIN SPANNER Another end fits adjustable cups with pin holes. The pins on this end are replaceable.. MATERIAL Built from heat-treated quality steel to maximum strength and longevity. The rubber-wrapped handle offers comfortable grip to fulfill the work easily. Length 305mm12. Weight 319g0.7lbs.. ORDER NOW, WORRY FREE We're so confident about our product quality that we can provide a life time warranty Made in Taiwan..

CRANK PULLERTool for crankset with for Shimano spline, oversized and ISIS drive B.B. The tool with removable adapter fits both square and splined ISIS or Octalink axles. Drive with 15mm wrench.. BB TOOL To remove or install B.B. for Traditional Tapered, for Shimano Octalink, ISIS Splined Great quality ensures that it will not damage the BB teeth. Works with any 20-tooth cartridge type bottom bracket. Heat treated steel construction increases the durability and lifespan of the tool. Conveniently works with 12 inch drive or 24mm wrench.. STRONG THREAD High quality Workshop quality. The precise thread of this tool is very strong, so it will NOT damage the thread of cranks and bottom bracket.. HEAT TREATED The tool is made of heat treated hardened quality steel. It is long lasting little but powerful too. Weight 245g0.54lbs.. ORDER NOW, WORRY FREE We're so confident about our product quality that we can provide a life time warranty Made in Taiwan..

FUNCTION Made to remove the non-drive left side crank arm off. No damage to my crank arm or frame.. COMPATIBILITY Special tool for for Shimano XTR FC-M970 crankset.. DEDICATED DESIGN The 4-bolt side is used to tighten or remove the crank arm cap. The threaded side can be screwed on to press against the crank arm bolt, then pull off the crank arm fixing from the spindle.. EASY TO USE Screwdriver access hole for more leverage to get the job done easier.. ORDER NOW, WORRY FREE We're so confident about our product quality that we can provide a life time warranty Made in Taiwan..

for Shimano 8-TEETH DUST CAP Compatible with 8-teeth caps on for Shimano Hollowtech II cranks.. SRAM RaceFace 16MM CAP Compatible with 16mm hex-shaped crank cap fittings including RaceFace, SRAM and Truvativ.. FITS 8MM HEX WRENCH 8mm hex fitting on both sides to offer more leverage for removing seized or overtightened caps.. MATERIAL Built from investment cast steel to maximum strength and longevity.. ORDER NOW, WORRY FREE We're so confident about our product quality that we can provide a life time warranty Made in Taiwan..

WHATS THIS FOR Sufficiently installing and removing the bottom brackets of Traditional Tapered, for Shimano Octalink, and ISIS Splined.. COMPATIBILITY Compatible with any 20-tooth cartridge type bottom bracket.. WHAT PAIRS WITH THIS Use it in conjunction with a 12 drive wrench or a 24mm open-ended shifter spanner. Recommend using a 12 drive wrench with ratcheting handles or torque wrench for better installation.. QUALITY MATERIAL Made of heavy-duty steel which makes this tool more durable, prevents the tools from wearing through the years of use, and is bottom bracket friendly.. ORDER NOW, WORRY-FREE We're so confident about the quality of our product that we can provide a one-year warranty Made in Taiwan..

WHATS THIS FOR For installing and removing 16-notch external bearing bottom bracket cups with an outside diameter of 41mm.. COMPATIBILITY for Shimano XT MT800 and Ultegra BBR60 bottom brackets. Also fits other 16-notch 41mm bottom bracket cups.. WHAT PAIRS WITH THIS Compatible with a 12 drive wrench or a 24mm open-ended shifter spanner. Recommend using a 12 drive wrench with ratcheting handles or torque wrench for better installation.. QUALITY MATERIAL Made of precision CNC machined aluminium alloy which makes this tool more durable and bottom bracket friendly. Weight 70g0.15lbs.. ORDER NOW, WORRY-FREE We're so confident about the quality of our product that we can provide a lifetime warranty Made in Taiwan..

COMPATIBILITY Tool to remove the crank arms off the bottom bracket. Removable head allows fitting all ISIS and tapered type. Adatper removed for tapered, adapter for ISIS BB. STRONG THREAD High quality Workshop quality. The precise thread of this tool is very strong, so it will NOT damage the thread of cranks.. HEAT TREATED The tool is made of heat treated hardened quality steel. It is long lasting little but powerful too.. EASY TO USE You need a spanner NOT included and crank puller to remove the crank arm off. Please view the video in the listing.. ORDER NOW, WORRY FREE We're so confident about our product quality that we can provide a life time warranty Made in Taiwan..

A HANDY KIT This set includes 2 tools with handles, eliminating the need for additional tools. Use them for installing and removing Shimano, SRAM, and center lock-type disc brake rotor lockrings, as well as other compatible cassettes. For more details, please refer to the video in the listing.. COMPATIBILITY Suitable for all Shimano, SRAM, and other compatible cassettes commonly found on MTB, road, hybrid, and gravel touring bikes. Compatible with 7, 8, 9, 10, and 11-speed cassettes.. HEAT-TREATED Constructed from durable heat-treated steel to prevent rounding off through years of use.. RUBBER-COATED Features a rubber-coated handle for a secure grip, providing better leverage during use. The chain whip tool measures 11 inches in length, while the lockring tool measures 9 inches.. ORDER NOW, WORRY-FREE We're so confident about the quality of our product that we can provide a lifetime warranty Made in Taiwan..

COMPATIBILITY for Shimano 16-Notch X 44mm Fits 16-notch, 44mm diameter external bearing bottom bracket cups includes for Shimano Hollowtech II, Campagnolo Ultra-Torque and Power Torque, Race Face, FSA, SRAM, Truvativ, Chris King Bearings. Also fits disc brake rotor lockrings with 16 external notches. NOTE Will fit for Shimano TL-FC24 and TL-FC25 adapters.This DOES NOT FIT for Shimano Dura-Ace 9000 series and XTR 980 series, BB9000, for Shimano BBR60 Ultegra any 41mm 39mm outside diameter. QUALITY 30cm whole length to provide great leverage and is made of high-quality heat treated steel for improved functionality and longer life.. 12 INCH 12 wrench compatible. if you need more leverage or more accurate tightening torque, you can use a long handle 12 driver torque wrench. Please view the video in the listings. RUBBER COATED Better grip with rubber coated handle which is long enough for more leverage.. ORDER NOW, WORRY FREE We're so confident about our product quality that we can provide a life time warranty Made in Taiwan..

WHATS THIS FOR A wonderful tool that can sufficiently install and remove the bottom brackets. Suitable for Traditional Tapered Square, for Shimano Octalink V1, Splined Octalink V2, and ISIS Splined BB.. COMPATIBILITY Compatible with any 20-tooth cartridge type bottom bracket.. WHAT PAIRS WITH THIS Use it in conjunction with a 12 drive wrench or a 24mm open-ended shifter spanner. Recommend using a 12 drive wrench with ratcheting handles or torque wrench for better installation.. PRO QUALITY Made of heat-treated steel which makes this tool more durable, prevents the tools from wearing through the years of use, and is bottom bracket friendly.. ORDER NOW, WORRY-FREE We're so confident about the quality of our product that we can provide a one-year warranty Made in Taiwan..

PLEASE DOUBLE CHECK THE COMPATIBILITY OF THIS TOOL BEFORE MAKING A PURCHASE. COMPATIBILITY Shimano 16-Notch X 44mm Fits 16-notch, 44mm diameter external bearing bottom bracket cups including Shimano Hollowtech II, Campagnolo Ultra-Torque and Power Torque, Race Face, FSA, SRAM, Truvativ, Chris King, and Phil Wood outboard bearing. Also fits disc brake rotor lockrings with 16 external notches. NOTE Will fit Shimano TL-FC24 and TL-FC25 adapters.. NOT FIT 16-notch bearing cups with an outside diameter of 41mm. Such as Shimano BBR60 Ultegra , 16-notch bearing cups with an outside diameter of 39mm. Such as Shimano Dura-Ace 9000 series and XTR 980 series, BB9000 DUST CAP TOOL will NOT fit the new Shimano Crankset Dust Cap which is bigger than old one Such as FC-6800. QUALITY This Bikehand YC-27BB is bottom bracket wrench. 10 inch whole length to provide great leverage and is made of high-quality heat treated steel for improved functionality and longer life. GRIP Better grip with rubber coated handle and long enough for more leverage.. ORDER NOW, WORRY FREE We're so confident about our product quality that we can provide a life time warranty Made in Taiwan..

Application Tool For install and remove the crank arm dust cap. Compatibility Only compatible with Shimano 8 teeth internal splines dust cap. Top Quality Sturdy plastic material makes sure you do the maintenance with confidence. Weight Only 12g - Lightweight and convenient tools have always been the pursuit of professional cyclists. ORDER NOW, WORRY FREE We're so confident about our product quality that we can provide 1 year warranty Made in Taiwan.

Designed specifically for the removal and installation of Hollow Tech II chain sets and Bottom brackets. Shimano II Crank Arm Bolt Tool TL-FC16. Crank installation tool for II.

item TL-FC21-Crank dustcapchainring nut tool.

Specifically designed to remove crank arms from splined Shimano Octalink and ISIS Drive bottom bracket spindles. It uses a long, comfortable handle and a fine thread for the leverage needed to remove tight crank arms. Now with a stronger rotating tip system to ensure smooth operation and long life.

2 IN 1 DESIGN 2 in 1 design satisfies all your needs, one side works for bottom bracket, the other one for crank. Universal Fit Specifically designed to remove and install bottom bracket for Shimano Hollowtech II and more. Unique design 22cm Length, thin, but extra strong design, can reach confined working areas where traditional. Carbon Steel Material Made by high quality carbon steel, high strength, non-deformation, durable for use. Application Ideal for home or professional bike mechanic. Suitable for wheel axel adjustments.

Screwdriver access hole for more leverage. Shimano Reference Number TL-FC35.

Removes and installs crank caps on Shimano Hollowtech II cranks. Includes built in hook to lift the safety plate. teel, investment cast body provides good leverage.

Removes and installs adjusting caps on Shimano Hollowtech II cranks.. Includes hex fitting for removing seized or overtightened caps.. Two ways of use Can be disassembled and installed directly by manual or Allen key.. Made of American DuPont nylon material means it will last a long time.. Package includes 1x Crank Adjusting Cap Tool..

The package includes 1x Crank Adjusting Cap Tool, 1x 6mm Allen Wrench Hex Key.. Removes and installs adjusting caps on Shimano Hollowtech II cranks.. High precision. Fully compatible with crank cap, not easy to damage crank cap and parts.. Built-in powerful magnet, can be adsorbed on the metal tool rack, not easy to lose.. Made of high-strength aluminum alloy, lightweight and long service life..