Top 6 Best Sig Red Dot Sight

This green dot sight comes equipped with a Picatinny mounting base and is also compatible with various handgun mounting plates that replace the rear sight dovetail. It's designed to fit the Doctor Footprint PlateSlide seamlessly.. The onoff switch for this sight is conveniently positioned at the front, making it much easier to press compared to red dots with side-mounted switches. It features a 3 MOA dot size and offers 5 illumination settings. The sight is fully adjustable for windage and elevation and can be locked into place. With unlimited eye relief and various illumination settings, it is powered by an included lithium CR2032 battery.. Since its initial release in 2014, we've implemented numerous improvements to enhance its durability, ensuring it can withstand recoil while also improving its ability to hold zero. The front switch, battery housing, and hardware have all been recently updated, reflecting our commitment to continuous enhancement. This product is proudly designed in Oregon.. Although it's feasible to install the optic on a handgun without the assistance of a gunsmith, we highly recommend seeking the expertise of a professional for the installation process. It's essential to note that unprofessional installations, such as improper torque application, can lead to issues like loose screws, an inability to hold zero, damage to the firearm or optic, and even pose a risk of personal injury.. If you're not seeing a perfect round dot but instead observe a splashed dot, half-moon shape, multi-dot, or starburst, there's a high probability 99 that you might have astigmatism without being aware of it. What you perceive is likely a small reflection of the LED light on the lens. A quick and simple way to confirm this is by using your cellphone to take a photo of the dot. If the photo shows a circular dot, you've essentially diagnosed yourself with astigmatism.. ADE RD3-006 Huracan,RD3-009 Crusader,RD3-012 Delta, RD3-012 PRO, RD3-013 Bertrillium ,RD3-015 Zantitium, RD3-028 Ares fit optic cutplate that is compatible with Vortex VenomBurris FastfireDoctor footprint. ADE RD3-018 Spike, RD3-021 Nuwa, RD3-021 NUWA PRO and RD3-030 Apollo fit optic cutoptic plate that is compatible with shield RMSRMSCDeltapoint Pro footprint. ADE RD3-021c NUWAcc fits optic cutoptic plate that is compatible with Trijicon RMRcc footprint. ADE RD3-019 Stingray, RD3-020 Raptor, RD3-022 Artemis, RD3-023 Valkyrie and RD3-029 Trumpet fit optic cutoptic plate that is compatible with Trijicon RMRSROHolosun 407C507C footprint.

ADE is introducing all new APOLLO PRORD3-030PRO. This ADE APOLO PRO is designed to fit any pistolmounting plateslideoptic cut with RMSRMSC screw patternfootprint.. Equipped with Solar Power that allows the red dot sight to continue to be powered when your battery is out. The battery life can last up to 50,000 hours depending on settings.. The APOLLO PRO is always powered on and features an auto-dimming sensor which regulates proper dot brightness based on ever changing ambient light conditions. The brightness will turn high and low accordingly to the environment brightness. Operates with a single CR2032 3v battery. There is no physical onoffbrightness button. The sensor does it all.. Ade APOLLO PRO created an iron sight curve at the end of the body, and also added two white dots on the curve. For the rear of part of the red dot to become a back up iron sight.. Comes with the adjustment tool, user manual, lens cloth, red dot cover, CR2032 battery, screws. Parallax-free Unlimited Eye Relief. Made of aircraft aluminum in anodized black finish with multi-coated lens. Weight approximately 17.5 grames0.61oz, Length1.6 x Width1 x Height.9. The objective lens is 22mmx16m0.87x0.63. Comes with 3 pairs of screws for Sig P365XLX, Springfield Hellcat OSP and Canik TP9 Elite SC ONLY. The provided screws might NOT work with EVERY compatible pistol listed. ADE makes the red dot to accept the industrial standard footprint. The pistol manufacturer makes the optic cutslide for the same footprint, but they have their own opinions to decide which type screws that the screw holes take..

ADE is introducing all new APOLLO PRORD3-030PRO. This ADE APOLO PRO is designed to fit any pistolmounting plateslideoptic cut with RMSRMSC screw patternfootprint.. Equipped with Solar Power that allows the red dot sight to continue to be powered when your battery is out. The battery life can last up to 50,000 hours depending on settings.. The APOLLO PRO is always powered on and features an auto-dimming sensor which regulates proper dot brightness based on ever changing ambient light conditions. The brightness will turn high and low accordingly to the environment brightness. Operates with a single CR2032 3v battery. There is no physical onoffbrightness button. The sensor does it all.. Ade APOLLO PRO created an iron sight curve at the end of the body, and also added two white dots on the curve. For the rear of part of the red dot to become a back up iron sight.. Comes with the adjustment tool, user manual, lens cloth, red dot cover, CR2032 battery, screws. Parallax-free Unlimited Eye Relief. Made of aircraft aluminum in anodized black finish with multi-coated lens. Weight approximately 17.5 grames0.61oz, Length1.6 x Width1 x Height.9. The objective lens is 22mmx16m0.87x0.63. Comes with 3 pairs of screws for Sig P365XLX, Springfield Hellcat OSP and Canik TP9 Elite SC ONLY. The provided screws might NOT work with EVERY compatible pistol listed. ADE makes the red dot to accept the industrial standard footprint. The pistol manufacturer makes the optic cutslide for the same footprint, but they have their own opinions to decide which type screws that the screw holes take..

This FDETAN body color RED Dot is one of ADE's newest product in 2022. ADE is now offering FDE body color optics for several of ADEs popular red dot models. The FDE standards for Flat Dark Earth, it is a Tan-ish color. This ADEs FDE color will not 100 match every FDE color handgun on the market because every handgun company made their FDE color proprietary, however, it will look great even the color might be slightly darker or lighter. ADE Spike also available in Black body and RED Dot. Designed to fit Canik Elite TP9 SC, Canik METE SFX, Canik METE SFT, Sig P365XLP365X, Ruger Max-9, Glock 43X MOS48 MOSnot compatible with regular glock 43x48 that are not MOS, Springfield Hellcat OSP, SW Shield 2.0 Optics Ready, SW MP9 EZ, SW MP shield plus performance center, Walther PPS M2 Optics Ready, Girsan MC1911SC Ultimate or any pistolmounting plateslide with RMSRMSC screw patternfootprint.. Hard coated aircraft aluminum in FDE body and multi-coated glass. Not plastic body with polymer lens.. ADE SPIKE red dot sight is always powered on with automatic brightness. Operates with a single CR2032 3v battery. With our advanced technology the sight only draws approximate 700 microampere powers to give a very long battery life. The brightness will turn high and low accordingly to the environment brightness.. 4MOA, Weight approximately 17.6 grames0.62oz, Length1.6 x Width.92 x Height.93. Ade SPIKE created an iron sight curve at the end of the body, and also added two white dots on the curve. For the rear of part of the red dot to become a back up iron sight. With the ultra short design, the red dot provides a distancegap on some full size optics ready pistols, to give enough distance to be a Co-Witness back up sight, in addition to the LED dot and pistol equipped iron sight. For non-optics ready pistols that need to use an optic plateadapter to replace the pistol manufacturer equipped rear sight, ADE Spike's rear white dot will act as a pistol factory original rear sight for Co-Witness.. Comes with screws for several Optics Ready handguns. Does not comes with any mounting plate such as picatinny mount or plate made for a specific handgun.. Comes with 3 pairs of screws for Sig P365XLX, Springfield Hellcat OSP and Canik TP9 Elite SC ONLY. The provided screws might NOT work with EVERY compatible pistol listed. ADE makes the red dot to accept the industrial standard footprint. The pistol manufacturer makes the optic cutslide for the same footprint, but they have their own opinions to decide which type screws that the screw holes take.. ADE Does not know the screw spec every pistol manufacture used for their screw hole. Please ask the pistol manufacture what screw specs they used on the hole and ask them to provide the screw. If you cant get the screw to work properly, we recommend going to a local hardware store such as ACE Hardware to get the right size..

Designed to fit Canik Elite TP9 SC, Canik METE SFX, Canik METE SFT, Sig P365XP365XLP365XL SPECTRE COMP, Ruger Max-9, Glock 43X MOS48 MOSnot compatible with regular glock 43x48 that are not MOS, Springfield Hellcat OSP, SW Shield 2.0 Optics Ready, SW MP9 EZ, SW MP shield plus performance center, Walther PPS M2 Optics Ready, Girsan MC1911SC Ultimate or any pistolmounting plateslide with RMSRMSC screw patternfootprint.. Hard coated aircraft aluminum and multi-coated glass. Not plastic body with polymer lens.. ADE SPIKE red dot sight is always powered on with automatic brightness. Operates with a single CR2032 3v battery. With our advanced technology the sight only draws approximate 700 microampere powers to give a very long battery life. The brightness will turn high and low accordingly to the environment brightness.. 4MOA, Weight approximately 17.6 grames0.62oz, Length1.6 x Width.92 x Height.93. Comes with screws for several Optics Ready handguns. Does not comes with any mounting plate such as picatinny mount or plate made for a specific handgun.. Ade SPIKE created an iron sight curve at the end of the body, and also added two white dots on the curve. For the rear of part of the red dot to become a back up iron sight. With the ultra short design, the red dot provides a distancegap on some full size optics ready pistols, to give enough distance to be a Co-Witness back up sight, in addition to the LED dot and pistol equipped iron sight. For non-optics ready pistols that need to use an optic plateadapter to replace the pistol manufacturer equipped rear sight, ADE Spike's rear white dot will act as a pistol factory original rear sight for Co-Witness.. Comes with 3 pairs of screws for Sig P365XLX, Springfield Hellcat OSP and Canik TP9 Elite SC ONLY. The provided screws might NOT work with EVERY compatible pistol listed. ADE makes the red dot to accept the industrial standard footprint. The pistol manufacturer makes the optic cutslide for the same footprint, but they have their own opinions to decide which type screws that the screw holes take.. ADE Does not know the screw spec every pistol manufacture used for their screw hole. Please ask the pistol manufacture what screw specs they used on the hole and ask them to provide the screw. If you cant get the screw to work properly, we recommend going to a local hardware store such as ACE Hardware to get the right size..

Designed to fit Canik Elite TP9 SC, Canik METE SFT, TP9 SC, TP9 SFT, Sig P365XLP365X, Ruger Max-9, Glock 43X MOS48 MOSnot compatible with regular glock 43x48 that are not MOS, Springfield Hellcat OSP, Mossberg MC2SC, SW Shield 2.0 Optics Ready, SW MP9 EZ, SW MP shield plus performance center, Walther PPS M2 Optics Ready, Girsan MC1911SC Ultimate or any pistolmounting plateslide with RMSRMSC screw patternfootprint.. Hard coated aircraft aluminum and multi-coated glass. Not plastic body with polymer lens.. ADE NUWA is the firstand the onlyred dot with RMSRMSc footprint that has TOP BATTERY LOADING system, no need to Remove the sight to change the Battery that requires re-sight in and waste ammo. Battery life approximately 500-800 depends on the brightness setting.. 2MOA Red Dot. Weight approximately 15.5 grames0.55oz, Length1.5 x Width..88 x Height.89. Comes with screws for several Optics Ready handguns. Does not comes with any mounting plate such as picatinny mount or plate made for a specific handgun.. Ade Nuwa created an iron sight curve at the end of the body, and also added two white dots on the curve. For the rear of part of the red dot to become a back up iron sight. With the ultra short design, the red dot provides a distancegap on some full size optics ready pistols, to give enough distance to be a Co-Witness back up sight, in addition to the LED dot and pistol equipped iron sight. For non-optics ready pistols that need to use an optic plateadapter to replace the pistol manufacturer equipped rear sight, ADE NUWA's rear white dot will act as a pistol factory original rear sight for Co-Witness.. For non-optics ready pistols that need to use an optic plateadapter to replace the pistol manufacturer equipped rear sight, ADE NUWA's rear white dot will act as a pistol factory original rear sight for Co-Witness.. Comes with 3 pairs of screws for Sig P365XLX, Springfield Hellcat OSP and Canik TP9 Elite SC ONLY. The provided screws might NOT work with EVERY compatible pistol listed. ADE makes the red dot to accept the industrial standard footprint. The pistol manufacturer makes the optic cutslide for the same footprint, but they have their own opinions to decide which type screws that the screw holes take.. ADE Does not know the screw spec every pistol manufacture used for their screw hole. Please ask the pistol manufacture what screw specs they used on the hole and ask them to provide the screw. If you cant get the screw to work properly, we recommend going to a local hardware store such as ACE Hardware to get the right size..

IMPROVED ACCURACY - Quick and easy to zero while holding up to strong recoil, this GlassFalcon Red Dot scope promotes rapid target acquisition with a crisp and clear 3 MOA dot.. EASY TO USE - The unique design of our gun sights makes for a hassle-free mount on just about any rifle or pistol setup. A lightweight, compact profile and intuitive controls ensure ease of operation.. HIGH-END OPTICS - All of our rifle and glock sights are tested by optics experts in the USA. The shockproof reflex Sight 3 MOA has been tested for 1000 rounds on all types of guns without losing your zero.. 100 SHOT VISIBILITY - The HD glass offers unbeatable clarity, with 10 brightness levels 8 day, 2 night for any lighting conditions. Perfect for target practice at the range, competitions or hunting. VERSATILE COMPATIBILITY - The weaverpicatinny rail mount is compatible with Vortex, Aimpoint, Holosun, Burris RDS, and more. Its scratch, water, and shockproof, and includes screws and wrenches..

2 MOA Red-Dot provides 10 illumination settings 8 daylight plus 2 NV for visibility in all light conditions. MOTAC Motion Activated Illumination powers up when it senses motion and powers down when it does not. Provides for optimum operational safety and enhanced 40,000 hour battery life. Integrated M1913 Picatinny interface provides industry-standard mounting options for a wide range of applications. Dependable waterproof IPX-7 rated for complete water immersion up to 1 meter and fog-proof performance. Ships with co-witness 1.41in riser mount pre-installed. Download the instruction manual not included in package.

2 MOA Red-Dot provides 10 illumination settings 8 daylight plus 2 NV for visibility in all light conditions. MOTAC Motion Activated Illumination powers up when it senses motion and powers down when it does not. Provides for optimum operational safety and enhanced 40,000 hour battery life. Integrated M1913 Picatinny interface provides industry-standard mounting options for a wide range of applications. Dependable waterproof IPX-7 rated for complete water immersion up to 1 meter and fog-proof performance. Includes a M1913 Picatinny low mount riser and a co-witness 1.41in riser mount.

High-performance lens coatings for excellent light transmission and dot contrast in any situation.. Ultra-compact size and weight with unlimited eye-relief and parallax-free operation.. Precise 2 MOA Dot. 1. 41 T10 Torx M1913 Skeletonized lightweight Riser Mount for absolute co-witness. Top loading battery compartment with integral brightness control featuring 10 daytime and 2 NV settings. Over 20,000 hours runtime on a CR1632 battery. Aircraft grade aluminum housing and mount. Dependable IPX-7 waterproof and fog-proof performance.

Package length 9.1 cm. Package width 19.7 cm. Package height 22.6 cm. Product Type SPORTING GOODS.

SIG SAUER RED DOT SIGHT - The fastest, most accurate, ultra-compact micro reflex sight, the ROMEOZero 1x24mm pistol sight has been optimized for everyday concealed carry and pistols with slim slide profiles Enables rapid target acquisition Parallax free. RUGGED DURABLE - This red dot sight features the SpectraCoat HD Polymer Lens with 10 times the impact resistance over traditional glass lenses Rugged WeaponsGrade textured polymer body gives this pistol sight a great level of drop protection. HIGH PERFORMANCE - MOTAC Motion Activated Illumination System powers up when it senses motion and powers down when it does not Highly efficient, point source LED emitter provides a crisp dot that is 8 times more efficient than conventional red dots. COMPATIBILITY - Direct mount to ROMEOZero Shield RMS-c footprint J-Point footprint This handgun sight is NOT compatible with slides cut to accept a standard ROMEO1 Housing optimized for use with Polymer pistols, concealed-carry and slim slide profiles. SPECIFICATION - Magnification 1x Objective Lens Diameter 24mm Battery 1 CR1632 Reticle 6 MOA Red Dot Overall Length 1.6 in Overall Width 0.93 in Height 0.93 in Weight 0.4 oz Illumination Settings 8 Daytime Run Time 20000 hrs.

Spectra coat HD polymer lens with 10 times the impact resistance over traditional glass lenses. Weapons grade ultra lite polymer housing, optimized for use with polymer pistols, concealed-carry and also slim slide profiles. Stippling pattern on the housing matches p365 and p365xl grip pattern, for an integrated look. 8 vivid, user-configurable daytime illumination levels. Motac motion activated illumination system that powers up when it senses motion and powers down when it does not. Sport type Airsoft.

DURABLE CONSTRUCTION - The ROMEO-X COMPACT, inspired by the MIL-SPEC ROMEO-M17, features a rugged CNC Machined 7075 Aluminum Housing, meeting military standards for reliability and performance, ensuring robustness to withstand challenging conditions Suited for the optic ready P365 Family of pistols Designed with RX footprint compatible with Shield RMS-c mounts, ensuring secure and versatile installation on compact pistols. HIGH-QUALITY OPTICAL COMPONENTS - Equipped with a Distortion-Free Aspherical Lens, the ROMEO-X COMPACT open reflex sight from SIG SAUER delivers a clear and distortion-free sight picture for enhanced accuracy The use of quality optical components ensures optimal light transmission and clarity in various shooting conditions. ENHANCED PERFORMANCE - The ROMEO-X COMPACT is equipped with an innovative ultra-low deck height that allows for seamless co-witnessing with standard-height iron sights Additionally, it integrates a patent-pending Beryllium Copper Flexure Arm, enhancing durability and ensuring reliable performance under demanding conditions. VERSATILE RETICLE OPTIONS - This ROMEO-X COMPACT features a Circle Dot reticle with individually selectable 2 MOA Dot 32 MOA Circle, providing versatility for different shooting scenarios Shooters can customize their reticle based on precision needs or quick target acquisition, enhancing adaptability in the field. CONVENIENT IN USE - ROMEO-X COMPACT incorporates intuitive adjustment buttons and a side-mounted power unit compartment for easy access With 20,000 hours of run time and MOTAC technology, it conserves power by activatingdeactivating illumination based on motion The sight offers 15 illumination settings 12 DL 3 NV, providing users with flexibility in adapting the reticle brightness to different lighting conditions.

-2 MOA Red-Dot provides 10 illumination settings 8 daylight plus 2 NV for visibility in all light conditions. -MOTAC Motion Activated Illumination powers up when it senses motion and powers down when it does not. Provides for optimum operational safety and enhanced 40,000 hour battery life. -Integrated M1913 Picatinny interface provides industry-standard mounting options for a wide range of applications. -Dependable waterproof IPX-7 rated for complete water immersion up to 1 meter and fog-proof performance.

Activated through motion sensing technology, MOTAC immediately powers up illumination when it senses motion and powers down when it does not in order to extend battery life. Highly efficient, ultra-wide broadband, anti-reflection lens coatings reduce surface reflections to extremely low levels across the entire visible spectrum providing superior light transmission. Electro-Optics industrial design inspired by our legendary firearms deflection armor trapezoidal surfacing breaks up the shape and visibility of the optic along with pistol slide serrations and grip checkering to add function to the form of all SIG SAUER. 3 MOA Red Dot. ElevationWindage Adjustments 100 MOA.

MODERN SOLUTION - The ROMEO1PRO 1x30mm Reflex Sight is the ideal sighting solution for modern guns This SIG SAUER 3 MOA Red Dot Sight brings a new level of durability and performance to the compact sights, giving you fast target acquisition. HIGH PERFORMANCE - The SIG SAUER Red Dot Sight has a molded glass aspheric lens, providing superior light transmittance and zero distortion The TruHold Lockless Zeroing System and the Motion Activated Illumination System increase performance and accuracy. DURABILITY - The aircraft-grade CNC aluminum housing of the Open Reflex Sight provides corrosion resistance, water resistance IPX-7 rated for water immersion up to 1m, and fog proof performance It also includes a ruggedized protective shroud in the box. INCREASED BRIGHTNESS - The Gun Sight ensures rapid target engagement under a full range of lighting conditions The new point-source emitter provides brightness day or night with 12 brightness settings 10 Daytime2 NV and 20,000 hours of runtime. COMPATIBILITY - The ROMEO1PRO Reflex Sight is compatible with M17, M18, P320-M17, P320 XFive Legion, P320 XCompact, P320 XFull, all PRO-CUT Slides, P320 Pro Series It is not compatible with slides cut to accept a standard ROMEO1 and isn't rated for 10mm.