Top 6 Best Sig Romeo Red Dot

Designed to fit Canik Elite TP9 SC, Canik METE SFT, TP9 SC, TP9 SFT, Sig P365XLP365X, Ruger Max-9, Glock 43X MOS48 MOSnot compatible with regular glock 43x48 that are not MOS, Springfield Hellcat OSP, Mossberg MC2SC, SW Shield 2.0 Optics Ready, SW MP9 EZ, SW MP shield plus performance center, Walther PPS M2 Optics Ready, Girsan MC1911SC Ultimate or any pistolmounting plateslide with RMSRMSC screw patternfootprint.. Hard coated aircraft aluminum and multi-coated glass. Not plastic body with polymer lens.. ADE NUWA is the firstand the onlyred dot with RMSRMSc footprint that has TOP BATTERY LOADING system, no need to Remove the sight to change the Battery that requires re-sight in and waste ammo. Battery life approximately 500-800 depends on the brightness setting.. 2MOA Red Dot. Weight approximately 15.5 grames0.55oz, Length1.5 x Width..88 x Height.89. Comes with screws for several Optics Ready handguns. Does not comes with any mounting plate such as picatinny mount or plate made for a specific handgun.. Ade Nuwa created an iron sight curve at the end of the body, and also added two white dots on the curve. For the rear of part of the red dot to become a back up iron sight. With the ultra short design, the red dot provides a distancegap on some full size optics ready pistols, to give enough distance to be a Co-Witness back up sight, in addition to the LED dot and pistol equipped iron sight. For non-optics ready pistols that need to use an optic plateadapter to replace the pistol manufacturer equipped rear sight, ADE NUWA's rear white dot will act as a pistol factory original rear sight for Co-Witness.. For non-optics ready pistols that need to use an optic plateadapter to replace the pistol manufacturer equipped rear sight, ADE NUWA's rear white dot will act as a pistol factory original rear sight for Co-Witness.. Comes with 3 pairs of screws for Sig P365XLX, Springfield Hellcat OSP and Canik TP9 Elite SC ONLY. The provided screws might NOT work with EVERY compatible pistol listed. ADE makes the red dot to accept the industrial standard footprint. The pistol manufacturer makes the optic cutslide for the same footprint, but they have their own opinions to decide which type screws that the screw holes take.. ADE Does not know the screw spec every pistol manufacture used for their screw hole. Please ask the pistol manufacture what screw specs they used on the hole and ask them to provide the screw. If you cant get the screw to work properly, we recommend going to a local hardware store such as ACE Hardware to get the right size..

Wrong Inventory fixed, customer will receive correct footprint for RMS, not RMR. This optic picatinny mount made by ADE is to connect to certain type of optic sight to standard 1913 picatinnyweaver rail. It does not connect to handgun because most handguns does NOT has a picatinny rail on top. Designed to use on ADE RD3-018 SPIKE, RD3-021 Nuwa, RD3-030 Apollo, Shield RMSRMScRMSwSMS and Romeo Zero Red dot sights.. Also Compatible with Leupold Delta Point Pro, JP Enterprises JPoint and Swampfox Sentinel, Vortex Defender-CCW, Bushnell RXC-200 Ultra-Compact red dot sights. Finished in a Matte Black Anodize. Comes with two screws. Does NOT compatible with Holosun 407k507k, user MUST grindlots of grinding to completely REMOVEFlat out the two rear pin to fit 407k507k. Ade has is releasing a new plate made specifically for 407k507k, please search amazon item numberAsin B09TMPGHRL.

This is a optic mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock 100. Does NOT fit Glock with AFTERMARKET slide. Installing the aftermarket red dot plate is not simply plug and play. We recommend having a qualified gunsmith to install. The included Glock plate fit some other Pistols such as Canik TP9SFdoes not fit SFX, COMBAT, SA. This Glock plate also fits Taurus GX4, G3C G3 with factory steel sights does not fit any other Taurus models such as G2G2CG3 without factory steel sightTx22PT111 because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications.. This optic dovetail plate made by ADE only fits genuinestandard glock that has a standard factory rear sight. It does NOT for MOSoptics ready glock. It does NOT fit glock with AFTERMARKET slide.. Compatible with Holosun 407k507k, Shield RMSCRMS, Sig Romeo Zero, ADE RD3-018 SPIKE, RD3-021 NUWAScrew provided for ADE, Shield, Sig and Holosun. Also compatible with other red dots that shares the similar footprint, but provided screws may NOT work, such as JPOINT4, Swampfox Sentine, CT1550, Riton X3 Tactix MPRD. We recommend get the right size screws from a local hardware store.. The footprint of this plate is NOT compatible with other footprints. This plate does NOT fit other red dots such as Vortex VenomViper, Doctor, Burris Fastfire, Trijicon RMRSRO, Holosun 407c507c, ADE RD3-006009012011013015019023.

2 MOA Red-Dot provides 10 illumination settings 8 daylight plus 2 NV for visibility in all light conditions. MOTAC Motion Activated Illumination powers up when it senses motion and powers down when it does not.. Provides for optimum operational safety and enhanced 50,000 hour battery life. Integrated M1913 Picatinny interface provides industry-standard mounting options for a wide range of applications. Objective Clear Aperture 20 mm Eye Relief Unlimite. Illumination Settings 8 Daytime 2 . NV Elevation Adjustment Range - 40 MO. Windage Adjustment Range - 40. MOA Reticle 2 MOA Red Dt. Adjustment increments 0.5 MOA Battery 1 CR203. Includes a co-witness 1.41 riser mount.

High-performance lens coatings for excellent light transmission and dot contrast in any situation.. Ultra-compact size and weight with unlimited eye-relief and parallax-free operation.. Precise 2 MOA Dot. 1. 41 T10 Torx M1913 Skeletonized lightweight Riser Mount for absolute co-witness. Top loading battery compartment with integral brightness control featuring 10 daytime and 2 NV settings. Over 20,000 hours runtime on a CR1632 battery. Aircraft grade aluminum housing and mount. Dependable IPX-7 waterproof and fog-proof performance.

Spectra coat HD polymer lens with 10 times the impact resistance over traditional glass lenses. ROMEOZero is Compatible With - Direct mount to ROMEOZero - Shield RMS-c footprint - J-Point footprint.. Stippling pattern on the housing matches p365 and p365xl grip pattern, for an integrated look. 8 vivid, user-configurable daytime illumination levels. SIG Sauer assumes no liability if a user attempts to mount a ROMEOZero to a Springfield Hellcat pistol slide.. Please note this product is not compatible with slides cut to accept a standard ROMEO1..

ROMEO5 GUN SIGHT - The ROMEO5 1X20mm Red Dot Sight mounts on any platform, and even though it's small, it's tough The solid, lightweight aluminum design gives peak performance years of service, so you can be on the top of a hunt or shooting competition. 2 MOA RED-DOT - For those avid shooters who admire classic red dot reticles on their gun sights, the ROMEO5 has 2-MOA Red-Dot, which is also adjustable It provides 10 illumination settings 8 daylight plus 2 NV for visibility in all light conditions. MOTAC TECH - The versatile ROMEO5 red dot sight features our Motion Activated Illumination technology It is developed to increase battery life by shutting down the system when not in use and instantly activating it by the slightest vibrationmovement. VERSATILE MOUNT - This gun sight comes with an integrated Picatinny mount provides industry-standard mounting options for a wide range of applications Also M1913 Picatinny low mount riser a co-witness 1.41 riser mount guarantees great compatibility. WEATHER RESISTANT - The dependable IPX-7 waterproof and fogproof construction of the ROMEO5 delivers non-stop hunting whatever the weather Unlimited eye relief allows you to acquire the aiming point and the target regardless of the position of your eye.

Dependable IPX-7 Waterproof and Fogproof Performance. Lens Caps Included - MAGNIFICATION 1X by 3X. OBJECTIVE LENS DIAMETER 20 millimeter ROMEO MSR 22 millimeter JULIET3 MICRO. RETICLE 2 MOA DOT - FIELD OF VIEW 7.4. EYE RELIEF 65 millimeter - EXIT PUPIL 7 millimeter - ILLUMINATION 10 DAY 2 NV. WATERPROOF IPX-7.

HIGH PERFORMANCE - Robust, compact ROMEO5XDR red dot sight with 50,000 hour battery life paired with the ultra-compact and lightweight JULIET5-Micro 5X magnifier is the best choice for avid shooters These electro-optics gun stock accessories ensure a lifetime of reliable service. ROMEO5XDR SIGHT - The XDR in ROMEO5XDR stands for Extended Dot Range, indicating an expanded illumination setting for the 2 MOA red dot reticle can be toggled between a 2 MOA dot or a 65 MOA circle dot reticle This allows users to adapt the brightness level according to different lighting conditions, ensuring optimal visibility in various environments. VERSATILE APPLICATIONS - With its 1x magnification, the ROMEO5XDR is a versatile sight suitable for a wide range of applications, including rapid target acquisition on shotguns, and even certain handguns Its compact design makes it well-suited for both tactical and sporting use. JULIET5-MICRO 5X MAGNIFIER - The Juliet5-Micro Magnifier features high-performance lens coatings, including a dielectric-coated prism, which ensures excellent light transmission This translates to a clear and bright sight picture, providing the shooter with enhanced clarity in various lighting conditions. CONVENIENT IN USE - The magnifier is equipped with a 90-degree push-button flip-to-side mount, allowing the shooter to quickly transition between magnified and non-magnified views With dependable waterproof and fog-proof performance, the Juliet5-Micro maintains optical clarity even in adverse weather conditions.

Designed for modern semi-automatic pistols, MSR platforms and shotguns. Short and medium range engagements and recreational shooting across a wide range of calibers and light conditions. Fully ruggedized and impact resistant for the toughest environments. Ultra durable and lightweight 7075 aluminum main housing and components. Comes standard with see-through lens covers and hex bolt mount.

HIGH PERFORMANCE - Lightweight and crystal clear, the Sig Sauer Romeo5 Tread Red Dot Sight is designed for those up close situations when you need to find your target quickly This compact sight with 1x aiming solution is optimized for the SIG M400 Tread. ENHANCED ACCURACY - To ensure maximum accuracy and performance, the 2 MOA red dot sight features ultra-low parallax and unlimited eye relief This Sig Sauer sight has 10 illumination settings 8 daylight plus 2 NV for visibility in all light conditions. MOTAC TECHNOLOGY - The Romeo 5 Tread Red Dot Sight has the Motion Activated Illumination that powers up when it senses motion and powers down when it does not It provides optimum operational safety and enhanced 40,000 hour CR2032 battery life. ROBUST CONSTRUCTION - The rugged and reliable design of this closed red dot sight prolongs the functioning of the optics Dependable waterproof IPX-7 rated for complete water immersion up to 1 meter and fog-proof performance increase durability. DELIVERY SCOPE - The package of the Sig Sauer Romeo5 Tread gun sight includes an M1913 Picatinny low mount riser and a co-witness 1.41 riser mount The integrated M1913 Picatinny interface provides industry-standard mounting options for wide applications.

Sig Sauer Romeo 7, Sight, 1X30mm, Fits M1913 Rail, GraphiteFinish, Full Size, 2 MOA Red Dot, 0.5MOA Adjustments SOR71001.

Product Type Aiming Scope Sight. Package Dimensions 8.9 L X 12.1 W X 19.7 H Centimeters. Package Weight 0.635 Kilograms. Country Of Origin United States.