Top 6 Best Silent Clock Mechanism

Clock Movement Mechanism - Ultra silent Scanning Design, two different shaft length quartz movement for your choice. Sweep clock movemen without any noise which can offer your sleep a silent environment.. Two Clock Mechanism Size -Short total shaft length 16 mm 0.63 in, thread length 8mm 0.315 in, suit for 3 - 6 mmthickness clock panel. Long Total sharft length 23 mm 0.9 in,thread length 15.4 mm 0.6 in,suitable for 9 - 13 mm thickness clock panel.. DIY Wall Clock Repair Parts Kits Including 2 x different size clock movement,5 Pairs Hour Minute hands,3 xSecond hand and 2second caps, easy for installation,Multiple choices in one set.. Clock Hands SizeThe size indicated in the picture shall prevail, they were made of aluminum, please do not install them with too much pressure or they will be bent, please check the sizes before buying.. Wide Application - DIY quartz wall clock replacement movement parts, suitable for repairing, replacing or making a clock,most can be applied to cross-stitch, three-dimensional embroidery, craft clock, frameless draw clock, etc..

Two Pack Clock Movements are included. Accurate, High Torque and Dependable when in motion, and the second hand spins without any ticking. No Noise, provide a comfortable environment to sleep, work or study.. Six different style size Clock Hands are included. An appropriate style size set can fit for many clocks. All sets are good for replacement, repair and making of clocks.. The total length of the shaft of this clock Movement is 710in 17.5mm, with a thread length of 25in 10.5mm that allows a clock face up to 310in 7.5 mm thick. It can be used in a clock dial diameter from 4-13in to 9-67in by different clock hands set.. All items are placed firm in a custom foam insert to prevent scratching, bending, and other damage to enclosed items during shipping. Good ideal for a gift.. What You Get 2 non ticking clock mechanisms and 6 set clock hands. Also included 2 wall nails, 2 metal hooks, 2 plastic washers, 2 brass washers, 2 brass nuts and 1 instruction sheet. StFlyBro worry-free 36-month warranty and Friendly Customer Service.. Kindly Note Please check the Size of Clock Dial Thickness and Diameter carefully..

Package Including1clock movement, 1hour hands, 1minute hands, 1second hand and some mounting hardware. No Battery. Easy to installThere is installation instructions in photo 6, follow the steps and takes a few minutes to get a nice clock.. Warm TipPlease do not use too much pressure to avoid bending, please check the size before purchase, suitable for AA battery.. Clock movement with smooth sweep motion The Silence DIY Clock Movement can move continuously, smoothly without ticking noise.. ApplicationThe quartz clock movement is appropriate to install in the cross-stitch, three-dimensional embroidery, craft clock, frameless draw clock, etc..

Total shaft length is 13.5mm 1732 inch, thread length is 5.5mm 732 inch.. This clock movement is suitable for 1-3 mm 364 - 764 inch thickness clock panel.. Made of ABS material, it is durable and long lasting use. Powered by 1 AA batterynot included.. Wide Application DIY quartz wall clock replacement movement parts, suitable for cross-stitch, three-dimensional embroidery, craft clock, frameless draw clock, suitable for repairing, replacing, or making a clock, and also suitable for various styles of the clock frame.. Note this clock doesn't contain hook, they can't hang directly..

CLOCK MECHANISM SIZE -Total shaft length is 12mm 0.50, thread length is 5mm 0.20.. EASY TO INSTALLATION -This clock movement is suitable for 2-6 mm 564 - 1564 inch thickness clock panel.. QUALITY MATERIAL - Made of ABS material, it is durable and long lasting use. Powered by 1 AA batterynot included.. WIDE APPLICATION - Clock mechanism can be applied for repairing, replacing or making a clock. Suitable for craft clock, frameless draw clock.. PACKAGE INCLUDE - You will receive 1 pack clock mechanism replacement, without battery and clock hans. Please check carefully the size before purchasing..

Long spindle clock movement wall clock mechanism replacement movement parts with long shaft. CLOCK HANDS KIT - Includes 4 pieces of minute hands and 4 pieces of hour hands, 2 second hand and 1 second caps, easy for installation Simple and elegant design, these replacement parts suit well to different styles of clock frame. Clock Movement Wide Application suit for repair and replacement your clock, pretty good for framless 3D wall clock. CLOCK MECHANISM SIZE -Total shaft length is 16 mm 0.63 inches, thread length 8mm 0.315 inches, suit for 3 - 6 mm thickness clock panel. RANGE OF USE - perfect for clock replacement, replacing or making a clock Applicable to cross-stitch, three-dimensional embroidery, craft clock, frameless draw clock, etc.

High Torque, Accurate Time Keeping Silent 2 Pieces Push-O O Shaft clock movement are included. They are accurate and dependable when in motion, and the second hand spins without any ticking. CE RoHS Certified clock motor. Non ticking clock movement battery operated, reducing noise, give you a comfortable time to sleep, work or study. This clockworks replacement can replace a Sangtai clock movement, such as a Sangtai 5168, 5168S, 6168, 6168S, 7168 and 7168S clock movement.. Broad Applicability and Styles 5 different style size clock hands are included. An appropriate style size set can fit for many clocks. Also, there are more options to decorate the clock face. All sets are good for replacement, repair and making of many clocks. This clock movement parts are used in table clock, wall clock, craft clock, cross-stitch clock, three-dimensional embroidery clock and frame-less draw clock, etc. It will help you to be a skilled clock maker.. Easy to Assemble StFlyBro clock mechanism and hands combo provide many parts to easily repair, replace and make a clock. The total length of the shaft of this clock motor is approx. 710in 17.5mm, with a thread length of 25in 10.5mm that allows a clock face up to 310in 7.5 mm thick. It can be used in a clock dial diameter from 7in 17.8cm to 14in 35.5cm by different clock hands set.. Shockproof Box Package All items are placed firm in a custom foam insert to prevent scratching, bending, and other damage to enclosed items during shipping. Package include 2 non ticking clock mechanisms and 5 pack clock hands. Also included 2 plastic washers, 2 brass washers, 2 brass nuts and 1 instruction sheet.. Life Time Friendly Customer Service If you are not satisfied with an item from StFlyBro, please send us a message with no hesitation. We will response you within 24 hours, and give you a satisfied service..

High torque movement long spindle quartz clock replacement movement parts with metal hook and 3 different pairs of hands2 black and 1 white, good for repairing, replacing or making a clock by yourself. The simple style clock movement can match to diverse colors, patterns, shapes clock panel, it will not stand out, good movement will work well.. Size total shaft length is 13 mm 12 inches, thread length is 6 mm 14 inches Sweep second movement, suitable for 1 -4 mm 1 25 - 532 inches thickness clock panel.Please choose the right size according to picture 2 before purchase.. Three of most popular clock hands. Different Size,Color and Styles. Meet different needs only in one package. The Diameter of Clock Panel should be more than 230mm 9.06in. The clock hands should be less than 230mm 9.06in.. Compatible clock applicable to cross-stitch, three-dimensional embroidery, craft clock, frameless draw clock, and especially suitable for DIY quartz wall clock replacement movement parts, etc. Good for repairing, replacing or making a clock by yourself. Package contents a clock movement,a metal hook,3 Second hands,3 Minute hands,3 Hour hands,3 Plastic washers,3 Brass washers and 3 Brass nuts,come with the specially designed protect box..

DIY clock repair kit you will get 2 pieces of high torque long shaft clock movements with 5 different pairs of hands, these replacement parts suit well to different styles of clock frame, good for repairing, replacing or making a clock by yourself. Size the total shaft length is approx. 20 mm 0.8 inches, and the thread length is approx. 14.6 mm 0.57 inches Jump second movement is suitable for 9 - 13 mm 0.35 - 0.51 inches thickness of clock panel. Accurate time keeping and quiet motor the long shaft clock mechanism offers great accuracy and dependability, equipped with sweeping motion, no ticking and will provide you with a quiet environment. Wide application these clock repair replacement parts fit for cross-stitch, three-dimensional embroidery, craft clock, frame-less draw clock, and specially suitable to be applied as DIY quartz wall clock replacement movement parts. 5 Different styles of hands this set comes with 5 pairs of clock hands in different styles and length for your options, great for clock creations and repairs while also providing a decorative effect.

EMOON DIY Clock Repair Kit Comes as 6 clock movements with 9 pack hands kit in a presentation box with custom foam inserts to protect all from scratching, bending, and other damage while shipping. Choose the Suitable Clock Mechanism Total shaft length is 34 in, thread length is 12 in, this kit fit clock dials from 18 in - 38 in thick , making you smile of the memories your old clock gives you. 9 PACK CLOCK HANDS Including modern and retro classic clock hands, fit for clock face from 512 in diameter you can pick out the style and length of the hands that look best for clock replacement or DIY at no additional charge. Time-keeping and Sweep Movement Motor features High precision Clock Mechanism, ensures watchmaker's accuracy silent movement powered by a AA battery, easy hang up on the nail included. A Deluxe Combo for Clock Maker Lover One set include 6 pack clock hands, 9 pack clock mechanism for clock repair or clock DIY, applicable to three-dimensional embroidery, craft clock, clock repairing, replacing or making a clock.