Top 6 Best Skat Blast

BIG 58w, 28d, 28h work area Overall abrasive blast cabinet size 60w, 30d, 64-12h. FULLY ASSEMBLED. Includes powerful Vac-50 HEPA Vacuum to remove dust as you blast adjustable 90 watt floodlight assembly 28 long double-strength cabinet gloves and C-35 FootPedal-Operated Power Gun. Strong 11-18 gauge USA steel construction 11 gauge steel door with welded angle-iron framework, 18 gauge steel body.. Requires 10-15 cfm 80 psi. 125 psi max.. 5-Year Limited Warranty. Made in USA.

Skat Blast High-Velocity S-35 Series Power Gun is trigger operated and designed especially for siphon blasting. Can be used to improve performance with old-style S-25 Skat Blast Gun and other siphon-fed trigger cabinets. Sturdy and dependable, features include larger direct air passages for increased air volume and better suction. This results in a stronger, more powerful blast, so powerful, it is often mistaken for a pressure blaster.. Plus, ergonomic handle and full-hand trigger let you feather the blast for special applications or use full blast for heavy rust and paint removal. More comfortable to hold and more durable than finger control type. Skat Blast Gun power head is manufactured from Zamac, a harder material than aluminum for longer life and has a case-hardened insert for better fit against back side of nozzle.. Stainless steel valve stem with a case-hardened steel valve stem guide make this gun the smoothest operating trigger gun on the market. Has 14 standard female pipe thread for your air inlet hose at bottom of handle. Your hose from pickup tube slips on power head. Accepts 58 ID siphon hose.. The S-35 Series Power Gun is used with all trigger-operated Skat Blast Cabinets. Complete with nozzle and air jet installed in gun, two extra steel nozzles, and allen wrench. Max 125 psi. 7-34 wide, 6-12 high, 1 deep. Made in USA. Patent No. D760,570.. Siphon gun requires 10-15 cfm, 5-7 HP air compressor. FOR SIPHON BLASTING ONLY..

Fit most Skat Blast Cabinets - are the most popular choice for cabinet gloves.. Made of long-wearing vinyl, with durable naugahyde gauntlets.. Coated twice for double the strength.. Flexible and comfortable.. Glove length may vary, 27-28L. Fit 7-14 I.D. Skat Blast Glove Flanges..

Skat Blast siphon power guns have an air jet, which fits inside the end of the power head assembly directly behind the nozzle. Both the nozzle and air jet must be changed on a regular basis to keep your cabinet in good working order. Because the size of the air jet must match the size of the nozzle, we make this convenient combo pack.. Combo pack includes 5 steel nozzles, 2 air jets, 2 air jet gaskets, and 1 nozzle gasket. Steel siphon nozzles are case hardened for longer life. Each will last approximately 1-2 hours.. After 1-2 hours, the nozzle orifice becomes enlarged to the next size. It is best to change the nozzle at this time. After 2-3 nozzles, replace the air jet and gasket.. Nozzles 1-58 long, 12 diameter, 14 I.D. Requires 10-15 cfm. Operating pressure 60-100 psi. Silver..

Fits Model 730, 731, 780, SC-35V, SC-45V, SC-28, SC-28V, 850, 850-T, SC-34, 930, 935, 950, 951, 952, SC-40, SC-46, SC-58, 960, and 960-T Skat Blast Cabinets.. Cabinet Lens is 316 thick tempered glass.. Includes acrylic outer lens protector .040 thick and one inner lens protector.. 12 x 24 x 316 thick.. Made in USA..

Fits 12 x 24 Cabinet Lens Note Inner Lens Protector measures 10 x 21-34 and is smaller than Cabinet Lens. Fits Model 730, 731, 731-TL, SC-33, SC-33V, 780, 780-TL, 781, 800-T, SC-35V, SC-45V, SC-28, SC-28V, 850, 850-T, SC-34, 930, 935, 950, 951, 952, SC-40, SC-46, SC-58, 960, and 960-T Skat Blast Cabinets.. Attach to inside of tempered lens. When inner lens becomes scratched, peel it off and replace. Saves wear and replacement of the more expensive tempered lens.. Tech Tip Always clean glass before applying. In some areas of the country, adhesive on inner lens can become less tacky from heat or extreme cold. If this should occur, use rubber cement from office supply store and apply to inner lens prior to installing.. 3-pack. 10 x 21-34 .0075 thick, mylar. Made in USA.

Skat Blast High-Velocity S-35 Series Power Gun is trigger operated and designed especially for siphon blasting. Can be used to improve performance with old-style S-25 Skat Blast Gun and other siphon-fed trigger cabinets. Sturdy and dependable, features include larger direct air passages for increased air volume and better suction. This results in a stronger, more powerful blast, so powerful, it is often mistaken for a pressure blaster.. Plus, ergonomic handle and full-hand trigger let you feather the blast for special applications or use full blast for heavy rust and paint removal. More comfortable to hold and more durable than finger control type. Skat Blast Gun power head is manufactured from Zamac, a harder material than aluminum for longer life and has a case-hardened insert for better fit against back side of nozzle.. Stainless steel valve stem with a case-hardened steel valve stem guide make this gun the smoothest operating trigger gun on the market. Has 14 standard female pipe thread for your air inlet hose at bottom of handle. Your hose from pickup tube slips on power head. Accepts 58 ID siphon hose.. The S-35 Series Power Gun is used with all trigger-operated Skat Blast Cabinets. Complete with nozzle and air jet installed in gun, two extra steel nozzles, and allen wrench. Max 125 psi. 7-34 wide, 6-12 high, 1 deep. Made in USA. Patent No. D760,570.. Siphon gun requires 4-8 cfm, 3-5 HP air compressor. FOR SIPHON BLASTING ONLY..

Made in USA Skat Blast Power Gun - the same gun used on trigger-operated Skat Blast cabinets Has full-hand trigger for operator comfort.. High Velocity Blast gun has larger air passages for more power. Requires 10-15 cfm air 80-100 psi.. Smooth Abrasive Flow - no surging or abrasive spitting. 2 ft Clear Siphon Hose won't kink or crack. Genuine Skat Blast Pickup Tube which has been the standard of the industry in Skat Blast Cabinets for over 40 years. Pickup tube is designed for fast, powerful abrasive flow. Overall pickup tube length - 18, tube OD - 58, mounting tab - 4-18 on center..

2-Pc bundle kit includes Powerful USA-made 115 volt vacuum motor 6008-00 with 8 ft cord and washable Skat Blast HEPA filter cartridge 6011-HEPA for higher dust filtration and improved visibility.. Fits Skat Blast Vac-55, 50, 45, and 40 Vacuums only. Most vacuum motor failure is caused by a worn filter. If worn, abrasive will leak through the filter and into the bearings of the motor, causing premature motor failure. Therefore, ALWAYS change filter cartridge when installing a new vac motor.. Vacuum Motor - 5-34 dia, 4-58h.. HEPA Filter Cartridge - 7-14 dia, 8h..

This item wears due to the abrasive stream, more quickly if nozzles and air jets are not changed promptly abrasive flows around nozzle, cuts a groove in the power head and stops siphon gun from working.. Our power head is manufactured from Zamac, a harder material than aluminum for longer life, and has a case hardened steel insert for better fit against back side of the nozzle. The result is long life and powerful suction.. Includes medium steel nozzle, air jet, and gasket. Requires 10-15 cfm.. Also fits old-style S-25 C-25 Power Guns.. 3-38 long, 3 high, 1 wide. Made in USA.