Top 6 Best Smallrig Cold Shoe

Triple Cold Shoe --- Triple Cold Shoe Bracket, allow you connect Microphone, Fill light and other devices. Extension 14 Screw ---14 Screw Hole Connect Magic arm to expand more equipment. Aluminum Material --- Full aluminum alloy material not only strong, but also lightweight. Pattern Screw Design --- Screws retain three positioning and decorative patterns to increase hand feel and better locking bracket.

Aluminum Material Features 3 versatile cold shoes with durable aluminum alloy construction. Cold Shoe Design Allows simultaneous use of multiple hot shoe accessories, compatible with flashes and microphone receivers with standard hot shoes, such as Canon, Nikon, Pentax, Olympus flashes and zoom recorders. Mounting Method Attach via shoe or 14-20 mount. Built-in backstop for safe installation. Wide range of uses can be used for any multi-purpose shooting such as short films, broadcast recordings, family gatherings and public presentations.

New Upgrade, More Smooth Upgrade soft light board based on old models, make supplement light softer and lither, not dazzling, perfect for vlogging. Built-in 2000mAh Lithium Battery Built-in large-capacity lithium battery, charging time is 2 hours, maximum brightness output up to 120 minutes, minimum brightness output up to 300 minutes. Natural Light 5500K Color Temperature Shows The Beauty of Natural Light, ideal for macro photography product and video shooting. Essential Light Beads, High Color Rendering Index A essential of 49 LED beads, CRI up to 95, to reduce post-grading work. Cold Shoe Mounts LED Video Light is Designed with Expandable Connection System via 3 expension joint interface 1 interface on the top, 2 interfaces on the side to connect multiple light panel together to strengthen lighting brightness and to get better lighting effects.

SmallRig Cold Shoe 2pcs Pack 2060 could be mounted on any camera accessories with 14 and M2.5 threaded holes, such as cage, cold shoe block, handle and plate etc. Such as cage for sony a6500 a6300 a6500, cage for panasonic gh5 gh4 gh3, etc.. The counter bore hole in the center is attachable to a 14 screw, but the 14 screw will not touch the hot shoe contact of accessories mounted on the cold shoe.. There comes with two secure bending bevels on the one end to prevent accidental removal. The arrowheads on the cold shoe show the direction to mount additional accessories.. NOTE This Cold Shoe Mount is NOT suitable for DJI gimbal and NOT for ZHIYUN as well. For using on a cage, except for SmallRig Full Cage1661, you only need to lock it on the cage via the included 14-20 screw, the M2.5 threaded is unnecessary..

It includes a 14 counter bore slot and a cold shoe. 14 counter bore slot could be mounted on the 14 threaded holes on the right side of Cage for Sony A6500 1889.. The arrowheads on the cold shoe point to anti-off direction.. The cold shoe is compatible with RODE microphone, wireless microphone and RODE SVMX microphone.. The cold shoe extends beyond the cage, thus it will not block the buttons and ports of the cage.. Materials Aluminum Alloy.

Portable and Lightweight Mini Mount 3577 is designed to hold your light onto the top of the camera, Cage or other mounting systems via a cold shoe adapter. Portable and Lightweight mini shoe holder, Weighing only 20g. If you don't want to put too much weight on the camera, this is a good choice.. Flexible Positioning The aluminium mount enables you to tilt up to 138 to position your light and realize precise lighting.NOTE Mini mount support device up to 250g.. Anti-scratch Made of high-quality aluminium alloy material, the surface adopts anti-oxidation treatment, more stable and durable. Features an Anti-scratch pad on the top to protect the device from scratch.. Wide Compatibility With a 14 screw on the top for light or microphone. With cold shoe adapter on the base for more accessories attachment if needed. Such as ID 3290, 3157, 3561, 3611 and so on.. Toolless installation Come with a cold shoe adapter on the base, you can quickly attach the mount to the camera or cage..

Anti-Twist SMALLRIG cold shoe monitor mount adapter 1960 can be mounted with two 14'' screws and it has a raised bevel above where the screws go. This cold shoe mount adapter can prevent twisting spaced perfectly. Two 14 Grooves This hot shoe bracket has two 14 grooves on the bottom, which allows users to mount it on any camera rig with two 14 holes from 9mm to 18mm apart center to center. The lining is smooth and cut is clean so that metal to metal contact when putting something in the hotshoe is nice and smooth feeling. Extensive Compatibility It is compatible with on-camera lights, top handles, on-camera microphone, or any other rigs with two 14 holes from 9mm to 18mm apart center to center, such as SMALLRIG 2049. Anti-Scratch There are two cambered chamfers on one end of the slot to prevent your coldhot shoe pinch from accidental removal.With the 4.5mm vertial gap in the middle of the slot, this cold shoe doesn't scratch the bulged electric contacts of the hot shoe pinch when slide in and out. Package Includes 1 x Cold Shoe 2 x 14 Screw 1 x Hex Spanner.

About SmallRig 2797 SmallRig 2797 is designed for accepting shoe mount devices such as flashes, lights, microphones, etc. NOTE This cold shoe mount only Compatible with products with cold shoe base and hot shoe without electronic contacts. 14-20 ScrewThe cold shoe mount secures to rigs, brackets, and cages via a 14-20 screw, and mounts to ball heads, magic arms, and monitor mounts via the integrated 14-20 female thread. Safety Release Button Featuring safety release in one end prevents the accessory from detaching accidentally to ensure your devices safe. Compatibility Fits Any cages, ball heads, or any rigs features standard 14-20 female thread and 14-20 screw. Package Includes1 x Cold Shoe Mount 1 x Allen Wrench.

Compatibility SmallRig Top Handle with Cold Shoe 3764 is designed to facilitate low-angle shot and reduce burdens on arms, compatibility for Universal coldhot shoe mount. Lightweight Only 129g Hollowed-out design makes it weigh only 129g. Mostly made of aluminum alloy, together with anti-slip and anti-freeze silicone. 5 Built-in Cold Shoe Mounts It has 3 front cold shoes and 2 rear cold shoes that allow simultaneously mounting microphone, LED light, monitor, and other accessories. Mounting Points SmallRig Camera Grip has an abundance of 14-20 and 38-16 mounting points for other accessories. An Allen wrench helps tighten the locking screw, making it easy to assemble and disassemble. Related Products 38-16 locating holes support Monitor Mount 2903, 2348 to attach monitors 14-20 threaded holes support Magic Arm 2070 for monitors.

Designed for Panasonic LUMIX GH6 SMALLRIG Cage Kit 3785 is specially designed for Panasonic LUMIX GH6 to provide accessory mounting points and offer full protection to your camera. You can still maintain full access to cameras interface, dial, buttons and battery door, even with the cage installed.. Multiple Mounting Points The cage has 14-20 holes and 38-16 locating holes for ARRI to attach Top Handle 2165, Side Handle 2093, Monitor Mount 2903, etc to assist handheld shooting, lens movement, and increase the stability of shooting images. It also has cold shoe for Microphone 3468, LED Light 3286. There are holes on both sides of the cage and at the bottom for attaching Hand Strap PAC2456, Shoulder Strap PSC2428, etc.. Integrated Quick Release Plate for Arca The bottom of the cage has a built-in quick release plate for Arca standard for Tripod 3257, enabling quick switching between tripods and handhelds. The built-in 14 threaded hole at the bottom can be compatible with extended quick release plate for DJI RS 2RSC 2, assisting your camera to shoot with a stabilizer.. Portable Handheld Cage Kit The included top handle is ergonomically designed for a comfortable grip, making it easy to carry around and take low-angle shots. The built-in anti-slip cold shoe on the top handle can be installed with SMALLRIG Monitor Mount 2905, and the positioning hole for ARRI is compatible with SMALLRIG Monitor Mount 2903.. Package Includes 1 x Cage, 1 x Top Handle, 1 x HDMIUSB-C Cable Clamp, 2 x M3 Screw. NOTE Before installing the cage, please remove the shoulder strap loop on the left side of the camera..

FOR 5 OR 7 ONBOARD MONITORSmallRig Swivel and Tilt Adjustable Monitor Mount with Cold Shoe Mount 2905 is designed to hold your monitor onto the top of the camera or other mounting system via cold shoe adapter. It features 14-20 screw on the top for monitor, light, or microphone.. SWIVELS 360 TILTS 170 The holder 2905 enables to swivel 360 sideways and tilts 170 with a free stop in any position. It enable you to position your monitor at the best viewing angle.. TIGHTNESS ADJUSTABLE The tightness of each axis is adjustable via the Allen wrench. The thumbscrew features holes for hex spanner to ensure your monitor safe. It can effectively prevent twist and don't need to worry about the monitor fall off. Note Please do use the Allen Wrench to re-tighten the thumbscrew for further secure.. RUBBER PADDINGThe swivel and tilt mount has protective rubber padding on top, which can increase the friction and protects the monitor from scratching. Besides, it includes an Allen wrench for tightening the mounts for further secure.. HIGH QUALITYThe robust mount is CNC-Machined Aluminum and can support 5 and 7 monitor up to 1.5kg 3.3 lb, which makes it lightweight and durable at the same time..

Universal Compatibility SmallRig Monitor Mount 3809 features a highly compatible cold shoe on the bottom, which fits camera hot shoe or shoe mount on camera rigs such as camera cages or handles. The 14-20 screw on the top can attach a field monitor, LED light or other accessories.. 360 Swivel 180 Tilt This camera monitor holder could swivel 360 and tilt 180, and keep your monitor or LED light in any fixed position without using tools.. Max Load Capacity 90 tilt load capacity is 3.2kg, 45 tilt load capacity is 2.5kg, and 30 tilt load capacity is 2.3kg. Its tightness is adjustable on each axis.. Secure Locking The large thumbscrew head makes installation easily and also features locking holes for an Allen wrench to further tighten it. The protective rubber pad on the top provides more friction to prevent deflection.. What's Included 1 x Monitor Mount, 1 x Allen Wrench. The 14-20 threaded hole at the bottom enables it to use with Magic Arm such as SmallRig 2070 and Ball Head 2948, etc.. Note Please do use the Allen wrench to re-tighten the thumbscrew for further security Please install the monitor before adjusting its angle..