Top 6 Best Smallrig Matte Box

CARBON FIBER BOX TOP FLAGSmallRig Lightweight Matte Box 2660 is designed to block the sun or other light source in order to prevent glare and lens flare, with interchangeable mounting systems that suits cinema or DSLR lenses. The included carbon fiber top flag helps block veiling glare or bright reflections from striking your lens, and it can be folded down to cover the front of the matte box and provide protection to the front of your lens.. WIDE COMPATIBILITYThe matte box comes with a 114mm clamp that allows you to mount it directly onto 114mm cine lens, and the included 67 to 114mm, 72 to 114mm, 77 to 114mm, 82 to 114mm threaded adapter rings allow you to use the matte box with lenses of different diameters.. SUPPORTS TWO 4 X 4 OR 4 X 5.65 FILTERSIt accepts two 4 x 4 or 4 x 5.65 filters without the use of filter trays and includes four adapter rings to attach the matte box to the lens. The filters can be easily pushed out from the side without leaving fingerprints on the filters by unscrewing the top thumbscrew.. FOUR 14-20 ACCESSORY THREADSWeights Only 238g without the top flag, SmallRig 2660 suits small mirrorless or DSLR cameras and is made from durable but lightweight carbon fiber material. There are four 14-20 threads on top of the matte box that allow you to mount additional accessories.. RECOMMENDATIONS OF SMALLRIGSeparately available 95 to114mm Adapter Ring SmallRig 2661 can be used for cine-style lenses. Besides, the matte box can be mounted onto your rig using an optional 15mm LWS rod clamp 2663 that attaches to the bottom 14-20 thread on the matte box..

CARBON FIBER BOX TOP FLAGSmallRig Mini Matte Box 3196 is designed for DSLR and mirrorless cameras to prevent sunlight or other light from causing glare and flare and to control the image on the screen. The adjustable carbon-fiber top flag blocks sunlight or strong light and also prevents internal reflections with its anti-reflective design. Moreover, it avoid vignetting in 15mm focal length shooting.. WIDE COMPATIBILITYSmallRig 3196 fits various standard lenses such as 4 x 5.65 and round filters. Its clamp connector works with different adapter rings optional model 3383 52-95mm 55-95mm 58-95mm 62-95mm 86-95mm, standard rings 67-95mm 72-95mm 77-95mm 82-95mm or attached directly to 95mm lens its adapter ring fits round CPL, ND filter and other round filters of up to 92.5mm. Besides, it leaves enough space for quick disassembly and adjustment of the round filter.. MULTIPLE INSTALLATION The filter tray 3319 can be quickly and smoothly mounted onto matte box via a NATO clamp. SmallRig 3196 enables to install round filters and multiple 4 x 5.65 plug-in filters of up to 4mm in thickness at the same time, which meet your multiple filter needs. Besides, the filter tray 3319 provides all-around protection of the filter with multi-point silicone. It is easy to store and prevents scratches and fingerprints while replacing plug-in filters.. 14-20 THREADED HOLESSmallRig Mini Matte box 3196 features 4 14-20 threaded holes on the top. It allows attaching other SmallRig accessories such as Magic Arms 2065, etc. Furthermore, its anti-twist 14-20 threaded holes on the bottom suits 15mm LWX Rod Support 2663, achieving a better shooting.. PORTABLE COMPACTThe Mini Matte Box 3196 is made from durable but super lightweight carbon fiber material. Portable and compact, with only 125gwithout adapter rings. It meets users' common shooting needs and easy for carrying outside..

CLAMP ON Directly to Lenses 85mm or Smaller via Filter Thread Adapters. FILTER SLOTS Support a Single 4x5.65 Filter and Stackable Circular Filters. COMPACT LIGHTWEIGHT Design Makes this Perfect for Gimbals. TOP FLAG Helps Eliminate Flares and is Easily Adjusted. LENS SUPPORT via included 15mm Rod Adapter Helps Support Heavier Lenses.

It features the perfect tools for on-the-go shooters and those who need to pair a matte box with a gimbal rig. The MB-T12 seamlessly attaches to any standard 114mm diameter lens. It even includes adapter rings for both 80mm and 95mm diameter lenses. Light weight, yet durable, carbon fiber and aluminum construction. 80mm95mm114mm134mm Adapter Rings designed to fit popular lens diameters.

Universal design for all camcorders and DSLRs Industry standard 15mm supporting rods, center-to-center rails distance 60mm. You can easily swing-away the mattebox without disturbing the camera from the tripod and rail system.you can free open from one sides ,applied in the photographic process frequent replacement lenses and filters ,easily and convenience. 2 dual-purpose filter trays made of plastic,supporting 4x4 filter used .one filter tray is fixed,another one of the filter trays is rotatable,which will be helpful when you use gradual ND filter. French FlagSide Flags The flags provide extra flare reduction and improves the quality of videos. The side flags are quick removable. They can be attached detached easily.Both flags can be folded for storage.. The flags are attached firmly on the sunshade mattebox by hinge mechanism. The side flags can be opened to the desired length by using the small knob provided on the flags.

pProfessional Shoulder Rig Turn your DSLR camera or camcorder into a pro filmmaking system with Neewer Shoulder Rig. Rest it on your shoulder or hold it with the top handle for low-angle shots. 15mm rods connect all the components, and the 60mm-gauge rod rails let you adjust their positions at will. pUniversal Baseplate Baseplate is compatible with DSLR cameras, video cameras, and camcorders via its 14 and 38 mounting threads. The quick release plate enables instant camera mounting, and the bubble level gives you precise horizontal composition. pMatte Box Follow Focus Matte box fits lenses 4377mm in diameter. The three flags block excessive light and avoid lens glare for clear, sharp footage. Follow focus allows you to adjust the focus smoothly and accurately with one hand. pComfortable Handgrips Shoulder Pad Anti-slip dual handgrips let you hold the rig with a firm grip while filming moving subjects, and the soft rubber shoulder pad helps reduce muscle strains after a lengthy filming day. pAccessorize the Setup Multiple 14 and 38 female threads enable you to equip the rig with various devices, including microphones, monitors, flash strobes, LED video lights to facilitate your filmmaking.

Universal design for all camcorders and DSLRs Industry standard 15mm supporting rods, center-to-center rails distance 60mm. You can easily swing-away the mattebox without disturbing the camera from the tripod and rail system.you can free open from one sides ,applied in the photographic process frequent replacement lenses and filters ,easily and convenience. The kit includes one French flag, and two adjustable side wings. Each of the three flaps can be positioned and locked in place so as to suit different focal lengths by providing the maximum amount of shading without getting in the way of the shot.. A set of 4 donut rings are included.Size at 103mm,76mm,64mm,51mm.By fitting one of these rings, light from the rear of the matte box can be blocked out, leaving only the camera lens protruding through. Donuts are slightly flexible, and the four sizes range to fit almost any lens diameter.. This Fotga DP3000 Matte box M3 is a professional device universally designed to accommodate all DSLR's and camcorders and it compatible with any industry standard 15mm rail system.

ONLY FOR MATTE BOX 3196SmallRig Lens Adapter Rings Kit 5255586286-95 3383 is an optional accessory which works with Mini Matte Box 3196. It is not only easy to removed and installed, but also lightweight and easy to store. Besides, it also serves as a fixed support for matte box 3196.. ANTI-DROP DESIGNSmallRig Adapter Rings 3383 adapts anti-drop design, prevent accidental disconnection and ensure safe and reliable shooting when it works with Mini Matte Box 3196.. WIDE COMPATIBILITYSmallRig 3383 Lens Adapter Rings 3383 are compatible with a wide range of round filters including CPL and ND filters of up to 92.5 mm, and leave enough space for quick disassembly and adjustment of the CPL filter rings. In addition, The kit is fully compatible with various lenses, providing an excellent shooting experience for users in terms of quick installation and scene switching.. WELL-MADE MATERIALThis lens adapter rings is constructed of a sturdy and premium aluminum alloy with strong oxygen resistance and quality.. SMALLRIG WARRANTY SERVICEFriendly 24-hour Customer Support, 30-day No-hassle Return Service, Worry-free 2-year Warranty..

Suitable for almost ALL Cameras,Compatible 14mm Ultra Wide-angle Lens or 114mm Front Thread Lens Universal design for all DSLR cameras, video cameras, interchangeable-Lens cameras Industry standard 15mm rod system and 19mm rod system. Support maximum of 14mm ultra-wide-angle lenses or large lenses up to 114mm in diameter. CNC Machined4x4 Rotatable Filter TraysRugged lightweight, Made of all metal CNC machined except for the matte box body and filter trays, in the case of ensuring the overall strength and minimize the weight. No Light Reflection,Height AjustableThe excellent extinction treatment inside of the matte box, can effectively block the glare and reflected light. One-button Releasing Swing Away StyleFor changing lenses quickly, the unit features a swing away mechanism at a 90 degrees and one key to unlock, automatic closure and allow height adjustable. Instead of moving the mounting position of the matte box, which may be blocked by other rig accessories, or require rod extensions to fit , it can simply be lifted one key to undo. Foldable Clip-in Type French Flag and Side FlagsThe kit includes one foldable French flag, and two adjustable side wings. All the flags can be folded and stored for easy carrying. Each of the three flags can be positioned and locked in place so as to suit different focal lengths by providing the maximum amount of shading without getting in the way of the shot..

COMPACT DESIGNSmallRig Mini Follow Focus 3010 is designed for easy and quick focus control in video shooting. It is basically compatible with the most cameras on the market like DLSRs Mirrorless Cameras. In addition, it features a super lightweight design with only 195g, compact and portable, easy for carrying outside.. ADJUSTABLE AB STOPSThe AB hard stops of the follow focus are adjustable, you can adjust the suitable AB focal length according to your shooting needs. Moreover, by turning onoff the AB stops lock, you can realize the easily switch of focal length between 360 unlimited zoom and AB focal length.. ANTI-SLIP ANTI-SWEAT DESIGNThe Mini Follow Focus 3010 imitates sports car hub, adopts anti-slip and anti-sweat design, and its excellent damping feeling and ergonomic design helps to control the focal length you need more accurately and comfortable, thus realizing a better shooting.. MODULAR DESIGNSmallRig Follow Focus 3010 adopts modular design that allows for assembling and disassembling on the left and upper sides of the camera rapidly and easily. Besides, the included 15mm Rod 1050 and Rod Clamp with NATO rail 3011 allows for attaching other SmallRig accessories such as NATO Side Handle 2187, Super Clamp Mount 1124 to improve the compactness of your equipment.. MULTIPLE SHOOTING SCENESThe installation angle of this follow focus can be adjusted, supports handheld, tripod mounted and other shooting scenarios. Furthermore, using the included snap-on gear ring belt and interchangeable M0.8 gears standard M0.8-43T gear, optional model M0.8-65T gear 3200, M0.8-38T gear 3285 enables well compatible with different diameters of lenses and achieves diversified shooting..