Top 6 Best Stepper Motor Controller

Controller Driver Integrated step motor controller and driver functions.It can not only realize the drive motor, but also control the working state of the stepper motor in real time. Forward Reverse It can not only change rotation direction by pressing button, but also by potentiometer. It is also automatically change the direction through the selected working mode to achieve multi-scene and multi-application. 4 Control Mode In addition to its built-in parameters work mode,it can also control by external buttons or others driver or UART commands. 9 work states Built-in 9 default workflow programs, covering most applications, to meet the needs of different scenarios.ForwardReverseDelayLoopSelf-lockingNo-lockRotating speed and so on. HD LCD display The HD LCD can clearly display the speeddelaycycle times, making it easier to browse and set various parameters. Realize high-precision control of the motor. Parameters support memory function that will not be lost.

Power supply 15-160VDC or 5-12VDC. If you are using 5-12VDC power, positive end connect DC 5-12V Input, negative end connect Common Cathode End.. 3 Frequency High 5.8KHZ-127KHZ, Mid 590HZ-15.8KHZ, Low 82HZ-2.3KHZ. To control the stepper motor, mus connect to the driver. PUL and PUL- pulsed positive and negative EN and EN- is to enable the positive and negative terminals DIR and DIR- are the positive and negative directions.. Frequency of measurement can amount PUL and common cathode terminal GND two ports..

Compatible Models Stepper motor controller fit for Nema1723 Motor. The micro stepping resolution can reach 1128, DC 5-30V. High Definition LCD Screen LCD screen can clearly display speed and cycle time. High definition display makes parameter setting and observation more clear and easy, and motor control more accurate. The controller parameters support the memory function screen that will not be lost, and the service life is longer. 9 Working Modes Motor controller has set a variety of fixed operating modes, and can set distancespeeddelaycycle times. You can select appropriate motion tracks to meet different scene applications. It can be run independently or used together with other systems. 13 Setting Functions The stepper motor controller including cycle number, motor turns, delay time, number of pulses, forward speed, flip speed, etc. The external buttons and knob encoder make it very easy to set the parameters. Control Mode The motor controller can control the direction and speed of rotation through buttons, external buttons, UART commands, other drivers or fixed working parameters. Applicable to more scenarios.

Integrated Controller Driver All-in-one stepper motor controller and driver for motor driving and real-time control of stepper motor working status. Kind reminder The user manual can be downloaded from the Technical Specifications section on the Amazon page.. Multiple Control Modes Automatic control mode, manual control mode, setting control mode, and UART control mode. For the setting control mode, it requires connecting to other stepper motor and just use this product as a standalone stepper motor controller.. Power-Off Memory Function Automatically saves and sets data such as distance, speed, delay, and cycle times to prevent data loss after power-off.. HD LCD Display Clearly and intuitively displays parameters such as forward and reverse pulse counts, forward and reverse speeds, delays, and cycle work times, facilitating browsing and setting for high-precision motor control.. Wide Application Suitable for general industrial control applications, such as CNC machine tools, mechanical packaging, electronic processing and testing, and automated assembly lines. Not suitable for special industries like medical, fire protection, or vital industrial fields..

L298N as main driver chip makes strong driving abilitysmall heatingstrong anti-interferencelow calorific value. Use large-capacity filter capacitors and diode with freewheeling protection function, increasing reliability. Dual-channel H-bridge driver working mode creates higher working efficiency. To avoid damage the voltage stabilizing chip, please use an external 5V logic supply when using more than 12V driving voltage. Large capacity filter capacitance, afterflow protection diode, more stable and reliable.

This driver is an upgraded version of TB6600 and with plastic cover.. The subdivision is increased to 32 subdivision, which is suitable for high subdivision.. Suitable for drive Two-phase stepping motor dynamic voltage 9V to 42V, the maximum drive current is less than 4A.. Suitable for step motorNEMA17,23 42, 57 type 2 phase 4 phase 4 6 8 wires. Suitable for any small-and-medium automatic equipment with CNC controller, such as X-Y-Z tables, labeling machines, laser cutters, engraving machines, and pick-place devices..

This module is a pulse generation module, supply the control signal to stepper driver. To control the stepper motor, it must be equipped with a drive.. This simple controller stepper motor stepper motor DC power supply can be composed of a simple set of control platform.. The controller has high 5.4k-160khz, middle 540-16.6khz, low 80-2.4khz total of 3 kinds of low frequency signal can be used to select the jumper.. Can produce pulse signal, can also produce PWM signal, can choose the jumper.. The frequency of measurement PUL and common cathode end..

Stepper motor driver DM542T is updated to version V4.0, add 5V24V logical voltage selector, alarm outputs. Please attension, Factory setting is 24V, if you need to use 5V, switch selector on the top of the driver.. Industrial-grade Stepper Driver, Suit for Nema 17 and 23 Stepper Motor. 1.04.2A, 2050VDC, 1128 Microstep Resolution. Pulse signal 4-5V when PUL-HIGH, 0-0.5V whenPUL-LOW. The same as DIR and ENA signals. 100 service satisfactory. We provided this stepper motor kit with 30 days free replacement or refund, 1 year warranty and whole life customer service from the date of purchasing..

Package included 1 x Stepper Motor Driver.. Stepper Motor Driver 9V-42V DC power supply, H bridge bipolar constant phase flow drive. The maximum 4.0A of the eight kinds of output current.. The largest 32 subdivision of the 6 models are optional Suitable for 4Wires, 6 wires and 8 wires stepper motor. it can control 2 phase stepper motor forward and reverse rotation, With 1-2, W1 -2 , 2W1 -2, 4W1 -2 phase excitation mode.. Protect form Energy-saving semi-automatic current lock function, built-in temperature protection and over current protection, under voltage protection, Preventing reverse.. Suitable for a wide range of stepping motors of Nema 17, 23 and 24 can used in various kinds of machines, such as X-Y-Z tables, labeling machines, laser cutters, engraving machines, pick-place devices and so on..

Working Range --- DC Stepper motor driver input voltage range is DC 5V-30V, which can be input DC 6V 12V 24V, Rated Current is 12A, Maximum Current is 20A, Maximum Output Power is 360W, Working Frequency is 1KHz-99KHz, Stepper Value 0.1-25.. Setting Instruction --- PON Default output when power on POF Default output close when power on L00-L49 Lowest output set to 00- 49 H100-H50 Highest output set to 100-50 F01-F99 PWM frequency set to 1Khz-99Khz O0.0-O9.9 Reach to 100 speed from 0.0-9.9 seconds C0.0-C9.9 Stop to 0 speed from 0.0-9.9 seconds. Digital Encoder --- repeatable and accurate Short Press encoder to startstop Long Press encoder to enter setting mode.. Instruction Light --- Light On during working Light Off during stop. One-year Warranty --- you can get a replacement under the long period warranty..