Top 6 Best Timpano

EQUALIZER AND VOLTAGE an output voltage of 7V RMS at 0.05 THD 11V-15V and an operating voltage of 11V-15V. It also has a bass equalizer, mid-bass equalizer, mid equalizer, high equalizer and each frequency adjustable has a -12dB to 12dB. RCA INPUTOUTPUT Our 7-band parametric equalizer has a turntable input, pre-amp line aux inputs via RCA jacks, and an RCA line output for powered speakers. You may use the RCA output to connect a power amplifier, then connect the passive speakers. POWERFULLY IMMERSIVE AUDIO Take your audio to the next level with our 7 bands parametric equalizer creating an audio experience that lets you listen to your beats. Filling the room with blue light that burst through the speakers. PARAMETRIC EQUALIZER DIMENSIONS our product has a dimension of 7'' x 4.1''x 1.10'' -inches with an approximate weight of 1.5 lbs. It was a 7 volt RMS pre-amp output with 3 input sources selectable and it is in the size of half din. WHAT YOU GET You will receive 2 mounting brackets, 8 Phillips-head screws, and a power red wire with 1A fuse and pre-amp line aux inputs via RCA phone jacks when you purchase our 7 band parametric equalizer.

2 Exit Aluminum Horn Ferrite Driver. 200 Watts Max Power. 100 Watts RMS Power. Impedance 8 Ohms. 2 Titanium Voice Coil.

COMPACT DESIGN Digital class D Brazilian technology allows this amplifier to have a small footprint by integrating a high-speed mosfet power supply with top of line transistors to ensure performance in a small heat sink without compromising performance. Dimensions 8.11 depth x 8.11 width x 2.60 height. POWER This amplifier is designed to run your stereo system with the power it needs to perform 1200 Watts maximum dynamic RMS power output of 4x 300 Watts at 2 Ohms per channel. Its high efficiency rate of 84 provides more power with less battery consumption.. BRIDGEABLE Double the power output to your speakers by bridging two channels. Minimum impedance of 4 Ohms per bridged channel at output power of 2 x 520 Watts RMS. TECHNOLOGY A smart electronic 2-way protection circuit protects the amp if it gets too hot or if speakers fail causing a short Focusing in sound quality, a full range response of 20 to 26,000Hz was used to give the best sound reproduction on this tiny amplifier.. FEATURES Fork terminal connector power and speaker wire Inputs. Built-in crossover filters for easy tuning Choose between a fixed HPF at 90Hz or LPF at 90Hz or just turn it FLAT and use your external crossover or DSP settings. It also includes Variable Gain Control. Level controls are not for adjusting volume. They adjust the amount of signal that is coming into the amplifier from your signal source..

This driver keeps resonances under control for natural response throughout the sensitive vocal range.. The vented pole piece and 2 voice coil are designed to dissipate heat allowing the TPT-MR8-4 Slim to handle 200 watts of continuous power.. The large ferrite motor is less susceptible to heat than neodymium to minimize power compression when driven at high output for long periods of time.. Timpano Audios MR Slim Series mid range loudspeakers are designed to provide low and mid range frequency sound reproduction in a wide range from a compact, slim design. These are some of the best choices for car door speakers in doors with a shallow depth.. It is also available in 6 TPT-MR6-4 SLIM and 10 TPT-MR10-4 SLIM..

Titanium diaphragm with a 2 voice coil. Impressive 110 dB sensitivity. 100 Watts RMS Power. Frequency Response 1.0KHz 20KHz. with PRO Audio long Horn Designed for maximum sound reproduction.

CRYSTAL CLEAR HIGHS These tweeters are capable of generating extremely loud volume you need to keep up in the high SPL environment. DESIGNED FOR EFFICIENCY The aluminum diaphragm has been engineered to take the power needed to keep up and maintain crystal clarity. BUILT IN CROSSOVER A capacitor that eliminates out all low end frequencies that might otherwise harm the super tweeters. SLIM PROFILE High performance pair of 3.75 inch compact design with 1.59 inches of mounting depth. QUALITY YOU CAN TRUST Engineered and designed in the USA, the ST3 are high compression bullet tweeters that are rated at 250 watts max peak power each. Ready to delivery major concert sound to your sound system.

COMPACT DESIGN Digital class D Brazilian technology allows this amplifier to have a small footprint by integrating a high-speed mosfet power supply with top of line transistors to ensure performance in a small heat sink without compromising performance. Dimensions 8.75 depth x 6.20 width x 3 height. POWER This amplifier is designed to run multiple speakers with the power they need to perform Systems that demand 1400 Watts dynamic RMS power output at 2 Ohms on 1 channel. Its high efficiency rate of 84 provides more power with less battery consumption.. FULL RANGE 2 OHMS STABLE A benefit of using a 1 channel full range amp is to be able to wire multiple speakers down to 2 Ohms and dividing the power. Most common setup is 4 speakers of 8 Ohms wired in parallel, providing up to 350 watts per speaker. Other common setup is 2 high power 4 Ohms speakers wired in parallel, providing up to 700 watts per speaker.. TECHNOLOGY A smart electronic 4-way protection circuit protects the amp if it gets too hot, if speakers fail causing a short and as well lowhigh voltage protections Focusing on sound quality, a response of 10 to 25,000Hz was used to give the best sound reproduction from this tiny amp. This makes it a popular option for systems with many drivers or tweeters.. FEATURES 4 gauge power connectors. 10 gauge speaker wire outputs. Variable Gain Control to adjust the amount of signal that is coming into the amplifier. Built-in variable HPF LPF crossover filters and a 3 band equalizer. This allows tuning for speakers or horn drivers, an easy setup without needing an external crossover..

7 Band Graphic Equalizer. 12 DIN Graphic Equalizer Crossover. 6-Channel 8-Volt RCA Line-Level Output. 2 Selectable Inputs. Subwoofer-Level Control.

HANDLES IT ALL We have combined the PRO audio and high fidelity audio into a new type of driver aimed at delivering high levels of clean output from stock speaker locations. POWER YOU CAN RELY ON The M Series speakers can be used to transform a stock system into a concert level experience without cutting up interior panels. EASY TO INSTALL No need for an amplifier and the shallow mounting depth of 2.44 is designed for easier installation. DESIGNED FOR EFFICIENCY In this series there are two options to chose from. The TPT-M6-8 8 Ohms and TPT-M6-4 4 Ohms. Both come in pairs and deliver 200 Watts MAX Power and 70 Watts RMS power with a Sensitivity of 94 dB and 110 8.5 kHz of Frequency Response. QUALITY YOU CAN TRUST This PA Style speaker is a great upgrade for listeners wanting to go well beyond the standard factory upgrade.

The TPT-360 is a full-feature three-way crossover.. It can be used for 2-way systems with front and rear fade capability or for a full three-way system. his electronic crossover allows you to choose from a wide range of crossover points between the front, rear and subwoofer outputs. Our crossovers are designed to provide the perfect frequency distribution to ensure the clarity and peak efficiency throughout your custom system.

DESIGNED FOR EFFICIENCY The TPT-3000EQ offer 1 channel with advanced individual equalization features for Bass, Mid Bass and Mid High, plus the traditional Level, High Pass and Low Pass features.. HANDLES IT ALL Its Full Range frequency response from 10Hz to 25KHz allows the installation of Subwoofers, Woofers, Drivers and Tweeters.. SMALL FOOTPRINT TECHNOLOGY The new line delivers the most innovative and powerful Brazilian technology in compact full range amplifiers on the market.. HIGH PERFORMANCE Loaded with features, it provides an unsurpassed efficiency rate of 85-95 in a compact Class D full range amplifier.. HIGH PERFORMANCE Loaded with features, it provides an unsurpassed efficiency rate of 85-95 in a compact Class D full range amplifier..