Top 6 Best Ultrasonic Fogger

6 Head Ultrasonic Mist Maker is suitable for indoor and outdoor pool fogging, covering the pool area of 2-3M2, and is suitable for a fixed water depth of 7-9cm. The water depth should be submerged around 1cm of the sensor head to ensure the normal operation of the mist maker.. Wide Range of Application 6 Head Ultrasonic Mist Maker is suitable for rockery, stage, garden, pond fogging restaurant landscape fogging.. Safe Easy to Operate Place the Ultrasonic Mist Maker in the water with the front facing up, and plug in the power supply to create a lot of mist. When the item is short of water during operation, it will be powered off automatically, safe and reliable.. Environment Protection The Mist Maker does not need to be heated or uses chemical. It adopts electronic over-frequency oscillation with an oscillation frequency of 1.7MHz, which will never harm humans and animals.. Halloween Party 6 Head Pond Fogger can create smoke on Halloween or other festivals, presenting a different holiday atmosphere..

10 Head Ultrasonic Mist Maker uses the high-frequency resonance of the disc to throw water away from the water surface to create a natural mist, increase air humidity and refresh the air. Suitable for pond, tank, festival, especially Halloween, Christmas, etc.. IMPORTANT PARAMETERS 10 Head Pond Fogger with waterproof power supply and float Voltage110V Size 288552mm Maximum evaporation 9000mlH Use Ambient Temperature 545 Use Environmental Water Depth 7-9cm. If the water level is deep, please use a float to achieve the best fogging effect.. LED LIGHTS There are five colors of LEDs white, red, blue, green, and yellow, which change in sequence. Five colors of LED lights can create a magical atmosphere for your pondaquarium. It is suitable for holidays such as Halloween and Christmas, and can increase the festive atmosphere.. WATERPROOF POWER SUPPLY The 10 head Mist Maker Fogger adopts the waterproof power instead of moisture-proof one. The waterproof power supply is suitable for dryhumid environment, and it will not be damaged due to the generation of fog, longer service life. NOTE Do not put the power supply and mist maker board connection port into water, as it may cause damage.. SAFETY 10 heads are in a design of independent line, not effecting each other it stops working when the water is running out..

High Quality 6-head Ultrasonic Fogger----The mist spray has 6 spray heads, the maximum evaporation is 4200mlH. Made of 304 stainless steel, it has the characteristics of high strength, good durability. It can be used for a long time and has a good effect at a water temperature of 1-45C. A buoyfloat is provided for necessary need when the water level is deep.. Water Shortage Protection Switch----The protection switch will automatically cut off the power when the water is insufficient to prevent the ceramic discs from burning dry, which is safe to use.. 250W Power Supply----This 250W power supply is IP67 waterproof, professionally cased, no wiring is required, works well in wet mist environment. However, please do not immersed in water.. Precise Capacitive Sensing Head----6 heads are in a design of independent line, not effecting each other it stops working when the water is running out electronic over-frequency oscillation, 1.7MH safe frequency, beyond the human hearing range, no harm to humans and animals.. Wide Range of Application----The 6 head ultrasonic fogger is suitable for decoration, creating a special atmosphere for stage, artificial landscape, festivals like halloween. Besides, it can also increase proper humidity for small plants, like mushroom, greenhouse flowers and so on..

10 Head Ultrasonic Mist Maker uses the high-frequency resonance of the disc to throw water away from the water surface to create a natural mist, increase air humidity and refresh the air.. Important Parameters 10 Head Pond Fogger with waterproof power supply and float Voltage110VIf you need 220V, please let us know Size 288552mm Maximum evaporation 7000mlH Use Ambient Temperature 545 Use Environmental Water Depth 7-9cm suitable for pond, tank, festival, especially Halloween, Christmas, etc.. Waterproof Power Supply The 10 head Mist Maker Fogger adopts the waterproof power instead of moisture-proof one. The waterproof power supply is suitable for dryhumid environment, and it will not be damaged due to the generation of fog, longer service life.. Float Mist Maker Float can help the 10 Head Mister Maker maintain a proper water level depth in deeper water to achieve the best fogging effect.. Safety Using precision capacitive sensor head, automatic power-off protection in case of water shortage, no dry burning, no scaling, effectively extend the service life..

Effective 12-head Mist Spray The mist spray has been updated for higher efficiency, with max. 12 spray heads, the spray volume can be up to 8400mlH the mist maker is crafted by food-grade 304 stainless steel, featured with high strength, corrosion resistance, good durability, it prevents limescale, and can be used for a long time, it works well within water temp 5-45C. A buoy is provided for necessary need when the water is deep.. Precise Capacitive Sensing Head 12 heads are in a design of independent line, not effecting each other it stops working when the water is running out electronic over-frequency oscillation, 1.7MH safe frequency, beyond the human hearing range, no harm to humans and animals. We provide extra 10 sprayer tablets for replacement, 221210 in total included in the package.. 400W 110V Power Supply One of the most updated power supply in market, there is generally 250W type in market. This 400W power supply is IP67 waterproof, professionally cased, works well in wet mist environment, of course, no immersed in water.. Function Overview In the process of ultrasonic atomization, the product will release a large amount of negative ions, combined with the smoke and dust floating in the air, can effectively remove harmful substances and odors such as smoke, carbon monoxide, bacteria, etc. ultrasonic technology produces water mist, dripping plant essential oil in water and the scent will radiate with the mist and it will be full of fragrance in the room.. Wide Applications Not only can the fog maker be used for decoration, creating a special atmosphere for stage, artificial landscape, festivals like Halloween but also provide proper humidity for horticulture, such as vivarium, orchids or for vegetable and fruit preservation. In addition, it also effectively clears the dust and smoke in the air in a electrostatic way..

PREMIUM MATERIAL This mist maker fogger is made by high thermal conductivity, high corrosion resistance and high quality 304 stainless steel, much better than other manufacturers' material of 201 stainless steel. The point is, the material of 304 stainless steel is durable and not rust.. AUTOMATIC CURRENT REGULATION The machine current voltage and temperature by less influence, because each nozzle current electronic automatic adjustment, the current increasing temperature will decrease does not affect the amount of fog, to avoid serious power tube heat current increasing the vicious cycle and damage the atomizer.. MAIN PARAMETER Ultrasonic nebulizer sprays up to 3kg per hour. Working voltage DC48V4.2A, frequency 1.7MHz. Power 200W. Suitable for all kinds of water, with pure water, tap water, electrolyzed water.. ATTENTION We've connected the wires between the atomizer and transformers, you can use them directly when you receive them. Put the atomizer in water before using, the transformer can not be put in water, then turn on the power supply. The atomizer is suitable installed in a tank with water depth of 7-9CM and is suitable for water level stabilization or artificial water filling. Transformers are moistureproof and not waterproof.. WIDE APPLICATION Ultrasonic fogging technology can be used for many horticultural application including hydroponics, propagation, foliar feeding, grow room and greenhouse hum-idity generation, etc. Also great gift for decorating Christmas.

Mist maker with LED. 12 LED lights 4 red, 4 blue, 4 yellow, can be flashed alternately to change different colors.Creates a dreamy lighting effect.. Multifunctional Ultrasonic fogger. Aerosolized amount 400 mL H. It can make enough fog to purify the unpleasant smell in the water. Has the effect of humidifying and cooling. Has a bactericidal effect.. Application scenario extensive. Ideal for indoor or outdoor fountains, water feature, and office use.Perfects for use it in your pond, rockery, fish tank, vase, birdbath, etc, then it will create a magical atmosphere.. Easy to operate.24V safe voltage. Plug in the power and put it into the water to work.. Enjoy a worry-free shopping experience. If you are not satisfied with the product, you can get a full refund within 30 days.Join your shopping cart to celebrate your holiday..

ULTRASONIC FREQUENCIES- This brand new 12 head mist maker humidifier utilizes electrical oscillation at ultrasonic frequencies to create the mist and water spray. This oscillation also produces negative ions, which help to freshen the air and the mist will add humidity to a room.. Main Parameter Ultrasonic nebulizer sprays up to 5kg per hour, working voltage DC48V5A, frequency 1.7MHz, power 250W. More suitable for all kinds of water, with pure water, tap water, electrolyzed water.. WATERPROOF SAFETY- The ultrasonic fogger is waterproof and the length of the power adapter cable is long enough. Automatic induction off water protection. Without worry about the potential danger for safe use.. EASY TO OPERATE- Just put mist maker in the water, and plug it in then the mist appears.. WIDE APPLICATION- This 12 head ultrasonic mist maker can be used in many horticultural applications including hydroponics, propagation, foliar feeding, grow room and greenhouse humidity generation, etc. You can put the fountain atomizer in your pond, rockery, fish tank, vase, tank, etc..

Application scenario extensive. Ideal for indoor or outdoor fountains, water feature, and office use.Perfects for use it in your pond, rockery, fish tank, vase, birdbath, etc, then it will create a magical atmosphere.. Easy to operate.24V safe voltage. Plug in the power and put it into the water to work.. Large amount of fog.Aerosolized amount400mLH,can create a dreamlike scene for you.. Multifunctional Ultrasonic fogger. It can make enough fog to purify the unpleasant smell in the water. Has the effect of humidifying and cooling. Has a bactericidal effect.. Enjoy a worry-free shopping experience. If you are not satisfied with the product, you can get a full refund within 30 days.Join your shopping cart to celebrate your holiday..

Premium Material This product uses high thermal conductivity, high corrosion resistance, high quality 304 stainless steel, much better than other manufacturers' 201 stainless steel material, 304 stainless steel material will not rust, have a longer time.. Protective Function Water level protection, when the water volume is insufficient, it will automatically power off. And can achieve rapid fogging, plug in the power immediately fog, welding anti-cracking, water temperature of 5-55 degrees can be used normally, indoor coverage area of 2.5m outdoor coverage area of 1.5m.. Main Parameter Ultrasonic nebulizer sprays up to 3kg per hour, working voltage DC48V4.2A, frequency 1.7MHz, power 200W. More suitable for all kinds of water, with pure water, tap water, electrolyzed water.. Widely Use Ultrasonic nebulizer 6 humidifier transformer, can be used for stage atomization and various horticultural applications, including hydroponics, breeding, foliar feeding, greenhouse flower humidification, viewing pool and so on.. User Attention We've connected the wires between the atomizer and transformers, you can use them directly when you receive them. Put the atomizer in water before using, the transformer can not be put in water, then turn on the power supply. The atomizer is suitable installed in a tank with water depth of 7-9CM and is suitable for water level stabilization or artificial water filling. Transformers are moistureproof and not waterproof. Thanks..

Water Shortage ProtectionMore advanced capacitance water level sensing control. Long service life, effectively prevent dry burning.. Built-in Water Temperature SensorWater temperature sensor is installed in the circuit part. Overheat protection above 130. Avoid damage caused by long-time high-temperature work.v. Pure Copper Discs CavityGood Heat Dissipation, low loss, durable.. Atomizer Disc Independent ProtectionA single broken atomizer disc wont affect others.. ParametersMist volume 18.7 lbh Working voltage DC45V3V Shell 304 Stainless steel Vibration frequency of atomizing disc 1700KHz Application Pong, fountain, supermarket, workshop, etc..

Power ProtectionThe atomizer is suitable for a water depth of 7-9CM. When the water volume is insufficient, it will automatically cut off the power, and the water temperature can be used normally at 5-55 degrees. It fogs up immediately after plugging in the power supply and the transformer cannot be placed in water.. Adequate SprayingThis ultrasonic fogger has a total of 6 sprinklers, evenly sprayed, so that plants absorb more water, the sprayed mist can be evenly dispersed and fully absorbed.. Durable MaterialThe ultrasonic fogger uses high thermal conductivity, high corrosion resistance, the good mechanical strength of the metal shell materials.. Long Life TimeThe current of each nozzle is automatically adjusted and the temperature of the current increase will decrease, to avoid the damage to the atomizer caused by the serious increase of the heating current of the power tube and the vicious circle.. Wide ApplicationOur 6 Head Ultrasonic mist maker can be used in many horticultural applications including the pond, foliar feeding, grow room and greenhouse humidity generation, water fountain, etc..

Mist Maker ParameterNumber of atomizing cores 12 Working voltage greater than or equal to DC48V Current 6A Mist output 6KGH Working water temperature 1-55 Working water level 60-80MM Wire length 1.5M.. High-quality MaterialThis product is made of 304 stainless steel, which is corros.ion-resistant, anti-oxida.tion, no ru.st, and has high thermal conductivity the built-in copper plate radiator has better heat dissipation effect and longer service life.. Protection functionDouble water cut protection, overheat protection, and power reverse connection protection. The surface of the atomizer is equipped with a power-off sensor, which has high sensitivity, will automatically powers off when lack of water. The anti-atomizer sheet is dry. The water temperature sensor is installed in the line part, above 55 does not work to avoid damage caused by long-term high temperature work.. Detailed DesigningThis product adopts wire-free atomizing film, which is easy to replace, and the service life of the atomizing film is up to 3000 hours. The shell of the atomizer is welded, corros.ion-resistant and not easy to form scale, anti-crack reinforcement, safe and durable.. Applicable SceneThis 12 Head Ultrasonic mist maker can be used in many horticultural application including hydroponics, propagation, foliar feeding, grow room and greenhouse humidity generation, etc.Pools, gardens, restaurants and other places are also good scenes for using atomizers..

12 Core Mist Maker Fogger Parameters304 stainless steel shell Power supply110V Working voltage DC48V Working Current 6A Mist output 7KGH Water temperature 5C-55C41131Working water level no lower than 8cm Indoor coverage area 12.25 sq Outdoor coverage area 4 sq Cooling model Air-cooled Power line 1.5 m. Safe to Use We have connected the wires between the atomizer and the transformer, and you can use them directly when you receive them. 304 stainless steel shell, corrosion resistance, no rust built-in copper plate radiator has better heat dissipation effect.. Protection FunctionBuilt-in water temperature sensor, temperature range 5C-55C41131, overheating automatically power off power off sensor has high sensitivity, it will automatically power off when there is water shortage to prevent the atomization film from drying out. Long lifeThe wire-free atomizing film is easy to replace, and the service life is up to 3000 hours. The shell of welded 304 stainless steel atomizer is corrosion-resistant and not easy to form scale, and it is crack-resistant and reinforced. Atomized tap water, electrolyzed water, purified water. Wide Use This 12 Head Ultrasonic mist maker can be used in many horticultural application including hydroponics, propagation, foliar feeding, grow room and greenhouse humidity generation, etc.