Top 6 Best Video Slider

4 U-shaped Ball Bearings U-shaped ball bearings under the slider part to ensure both smooth motion and minimum abrasion on aluminum alloy tubes. Flexible Uses The track can be used on the ground or worked with tripod It can be directly connected with camera, or indirectly connected with camera via ball head. Multi-Angle Shooting Available for vertical, horizontal and 45 degrees shooting by using the threaded holes in the slider. Adjustable and Secured Legs Height of legs could be adjusted from 8.5 centimeters to 10 centimeters Gear-shaped joint interface and locking knobs for better position locking for the legs. Convenient Carrying Bag Easy to carry, transport and store Excellent company for video making.

Carbon Fiber Camera Slider Made of carbon fiber and aluminum alloy, this camera slider is solid and durable. Measuring only 1640cm in length and weighing 23.6oz670g, you can take it anywhere you go with the carrying bag. Smooth Movement The four precision bearings ensure a smooth sliding movement to create seamless video content. There is also an optional M6 threaded hole above each slider foot. Use these holes to install the feet and balance your cameras center of gravity when the camera is mounted on the slider.. Multiple Mounting Options Multiple 14 and 38 threaded holes at both ends and the bottom of the slider offer a wide range of mounting options. Use the slider on your tabletop, tripod or light stand. A 14 to 38 screw adapter is also included to mount most cameras and ball heads. Adjustable Phone Holder The phone holder features an adjustable 5.78.6cm width and is compatible with most cell phones. Easy to Use Easily angle the slider to take vertical or horizontal shots on a tripod and get premium shooting effects. The four rubber feet are removable and can be adjusted to shoot at a lower angle on most surfaces while ensuring stable shots.

MADE BY HOLLYWOOD VETERANS Is this the gear for video creators or a pocket sized professional motion control kit used by National Geographic and other movie cameraman We have created it for both.. 3 IN 1 The worlds smallest remote controlled camera motion control kit with a motor thats interchangeable and coverts from micro dolly to camera slider and panoramic mount all in 1 kit. MOTION MAGIC FOR YOUR VIDEO Make magical movements in your time-lapse videography with super slow speeds. MADE TO LAST We have made our directors set from the good stuff, Made with reinforced plastic covering tensile alloy weight bearing joins. Includes 2,5 hours rechargeable battery - Operates vertically or even upside down. COMPATIBLE WITH ALL SMALL CAMS Can be used with Android Apple , Sony , Canon, Lumix , Insta360 , GoPro Mirrorless, Smartphones Action Cameras. Has multiple 14 threads for connecting to suction cups or tripods..

Versatile Smooth Camera SliderThis 31.580cm long remote camera slider automatically moves your camera back and forth for professional video shooting. The maximum load capacity is 11lb5kg when placed horizontally and 5.5lb2.5kg when tilted up 45. Smart Two Way ControlThe slider supports both App control download the NEEWER app and 2.4G upgraded RT-08 remote control not included. Designed with manual mode, video mode with constant speed, slow startstop, and time lapse, the slider automatically moves your camera back and forth from a preset start point to an end point. Better control camera motion by changing slider settings including frames, video length, interval, shutter speed App, exposure time remote. Powerful yet Silent MotorThe ER1-80 camera slider uses a unique silent stepper motor driver that combines ultra precise positioning with ultra silent operation to provide smooth and noiseless camera movement for video production. Use the included 2600mAh NP-F550 lithium ion battery and USB charger, or the 5V 2A type C power jack to connect to a portable charger to power the motor and start filming for hours on end. Multiple Shooting AnglesFeaturing adjustment knobs on both sides of the slider to achieve different shooting angles, adjust one knob to lower left and the other to upper right for tracking shots, set one knob to upper left and the other to lower right for 120 panoramas, and resume both knobs to their middle positions for horizontal shots. The slider can also be placed at a 45 tilt angle or 90 vertically. Sturdy yet Lightweight BuildThe carbon fiber build guarantees sturdy and stable structure while making the slider lightweight for outdoor photography. The featured 4 roller bearings provides extra balance and anti shake effects. With 14 and 38 threaded holes at the bottom and on sides, the slider can easily mount on a tripod.

Versatile Dolly A technology accessory that allows you to get professional, low-level shooting, tracking and panning in an easy and simple way, Vidpros SK-22 Professional Skater Dolly is specially created for DSLRs, camcorders and recording equipment. High-Quality Construction The Vidpros SK-22 Skater Dolly is expertly constructed with a CNC-machined aluminum chassis and smooth-rolling rubber wheels with stainless steel ball bearings to provide long-term durability and easy mobility for years on end.. Axle Adjustment Achieve cinematic panning in straight lines, broad curves or full 360 circles. The Vidpro SK-22 Professional Skater Dolly is equipped with angle position markers to allow for fast and easy axle adjustment.. Special Features Vidpros SK-22 has a built-in base plate with seven, -20 threaded mounting points which can be used for extension arms, ball joints or cameras. For convenience, it also includes a 27-inch extendable handle and articulated magic arm.. Customer Satisfaction Our products not only reflect Vidpros cutting-edge technology, but also our commitment to providing people with quality and reliable products emphasized by the extensive warranties we provide to ensure customer satisfaction..

The lightweight, motorized carbon fiber slider features parallax tracking, panorama, time-lapse, remote control, and automatic startend point options, allowing you to perform a variety of high-value motion shots. The slider measures a total of 47 in length and the tracks are made from lightweight carbon fiber and the carriage and legs are made from durable aluminum.. camera slider features a 32 sliding distance and supports horizontal camera loads up to 11 lb and up to 5.5 lb at up to a 90 angle. There is also a center track that allows the carriage to perform angled slides, 120 panorama shots, and parallax tracking shots. A battery-powered Bluetooth wireless remote controller is included and provides configuration for the adjustable carriage motor. You can set slider speed, automated interval presets, time-lapse functions, and more. You can also control the camera shutter to match the moves of the slider with the included shutter cable set.. Camera sliders are equipped with multiple 14-20 and 38-16 tripod threads to mount the slider on the center, or you can set it on a surface with the end feet. A ball head allows you to mount your camera on top of the carriage. Also included with the slider are two batteries, a battery charger, a shutter extension cable, and a carry bag.. Support Multiple Shooting Modes and Tracking Shots, The slider supports a time-lapse, panorama, parallax, or standard video siding shot. Customizable Settings On the Bluetooth remote, you can set shooting mode, startend points, speed, keyframes, delay time, stop time, photo number, and more.120 Panorama The slider features a 120 panorama mode, which can be achieved by adjusting the red knob on both sides of the camera..

Ultra Silent Smooth Motorized Slider This 39.4100cm carbon fiber motorized camera slider has 4 roller bearings and an ultra silent stepper motor drive that combines precise positioning with the mute operation. It has 14 and 38 threaded holes on the bottom and sides for mounting on a tripod. The maximum load capacity is 11lb5kg when shooting horizontally and goes to 5.5lb2.5kg when the slider is tilted 45. Multiple Shooting Modes Available It can achieve multi angle shooting effects via adjusting the red knobs on both sides of the camera slider to capture horizontal, tracking, and 120 panoramic shots. Also supports video shooting to move at a constant speed and time lapse shooting with adjustable exposure time, interval, number of shots, delay, fixed shot and automatic calculation of shooting duration. Support 2.4G Wireless Remote Control Use the 2.4G wireless remote control to set the start and end points of this camera slider so that it moves back and forth automatically. You can also select the video mode to set the speed of the slider's movement for more photographic creativity. The remote control has a built in 1020mah lithium battery, which can be charged with the USB type C cable included in the package. Battery and Charger Included One rechargeable 2600mAh NP-F550 lithium ion replacement battery and a USB battery charger are included to power the motor. Or use a USB portable charger with 5V 2A output not included as the power source to power them. Package Contents 1 x 39.4100cm Motorized Camera Slider, 1 x 2.4G Wireless Remote Control, 1 x NP-F550 Replacement Battery, 1 x USB Battery Charger with Charging Cable, 1 x USB Type C Charging Cable, 1 x Ball head, 1 x L Shaped Hex key, 2 x Screw, 1 x Carrying Bag, 6 x Shutter Release Cable C1, C3, N1, N3, S1, S2, compatible with Canon Nikon Sony Panasonic Samsung and Pentax cameras. Other camera models require the additional purchase of a shutter release cable..

Support Multiple Shooting Modes-Electric camera slider 6 in 1 with tracking shooting, panoramic shooting, time lapse, video capture, free Set starting point and ending point.Set the starting and ending points as needed, The sliding speed, The dwell time, the sliding distance, The pause time, the number of pictures etc.. With multiple 14 and 38 Screw ports -The motorized camera slider is made of carbon fiber with a stable carriage assembly ,slide rails are equipped with multiple 14 and 38 Screw ports on both sides and in the middle, compatible with a variety of tripods.using the screw holes can vertical, horizontal and 45 degrees shooting.. 6 shutter release Cable and 1 extension cable-the motorized camera slider equipped 6 shutter line to compatible most kinds of camera, you can use the extension cable to solve the issue of the line not enough length.All-round to meet your Shooting needs and Improve the shooting Grade, making the shooting more professional and more shocking.. Smooth and easy to carry motorized camera slider is made of carbon fiber , that make It more stable and anti-shake, make sure to provide stable video and clear photography pictures convenient. Both side of the slider are adjustable legs, which can adjust the height and angle for leveling on anywhere. The camera slider contains a carry bag, so you can carry it outside for photography conveniently.. Wireless APP Control- Instead of using a hardwired controller, the 31 Wireless Carbon Fiber Motorized Camera Slider from GVM lets you manage and control the motorized motion via an iOSAndroid app from your smartphone or tablet..

Sturdy yet Lightweight BuildThis 3180cm motorized camera slider is made of carbon fiber, a silent stepper motor driver, which guarantees a sturdy and stable structure while making the slider lightweight for outdoor photography. An NP battery is included to power the remote control and motor.. 3 shooting modesThis camera slider can achieve horizontaltracking 120 panoramic shooting by adjusting the rod position to get multi-angle shooting effects. The rod position of tracking shooting is up-left down-right Panorama shooting is down-left up-right horizontal shooting is the horizontal adjustment.. 2 menus of shootingone is video capture to make you have uniform motion speed at any time and auto round trip via set starting point and ending point, another is time-lapse to get 1000 pieces photos at this time and can accurate step distance and auto round trip via set starting point and ending point.. With multiple 14 and 38 Screw ports The Dolly Rail Slider is equipped with multiple 14 and 38 Screw ports for installation on a Most tripod, using the screw holes can vertical, horizontal, and 45 degrees shooting. The featured 4 roller bearings provide extra balance and anti-shake effects.. Camera Slider Kit This kit includes a motorized camera slider, a remote control, a Data Cable, an NP battery, a battery charger, a ball head, a hex key, an extension cable, and six shutter release cables. Compatible with most camcorders and miniature cameras, you can use the extension cable to solve the issue of the line not having enough length..