Top 6 Best Vortex 30mm Scope Rings

This is a 30mm one piece riflescope rings. Mounting rings are pushed forward 2 for better eye relief.. ADE Cantilever Mount was designed by the experienced merchandise experts and ADE is able to get it from OEM manufacturer to sell at a fraction of cost compare to other brands where purchase this same mount and resale for a lot higher. Our 3-bolt clamping systems with over 6,500 lbs of clamping force hold your scope firmly to the rail. Relief cuts designed into the scope tube bearing surfaces prevent scope pinching and ensure clamping forces are evenly distributed along the top and bottom of the scope body.. The Mount has no protruding levers, bolts, or knobs to rap your knuckles, or get caught on clothing, gear, and surroundings. Height 1.5. Weight 6oz. Screw Torque - 15 in-lbs. We are so confident in these mounts they are covered under our excellent Lifetime Warranty..

These Vortex Pro Series Rings position the center of the riflescope tube at a height of 1. 0 Inches 25. 4 mm from the base. Sold two rings per package.. The finishing touch to your rifle and optic combination. Pro Series rings combine rock-solid reliability and strength with high quality machining to ensure ultimate accuracy and consistency.. Streamlined, lightweight and durable, these rings use four T-25 Torx-style socket cap screws for secure mounting.. Fits Weaver and Pica tinny Rails. Weight Per Ring 48. 7 Grams - 1. 72 oz.

These Vortex Precision Matched Rings position the center of the riflescope tube at a height of 0.87 inches 22.1 mm from the base. Will only work with Picatinny spec mountswill not work with Weaver mounts.. Our Precision Matched Rings are kept in pairs throughout the manufacturing process ensuring perfection from one set to another.. We start with certified USA 7075 T6 billet aluminum and hold it to an extremely tight tolerance of .0005 using our precision Computer Numeric Controlled CNC mill.. These Vortex rings are serialized, vibratory tumbled, hand-bead blasted and finished off with a Type III hard coat anodize.. Sold two rings per package. Hex wrench included. Made in the USA..

Robust 6-screw Tactical Ring is perfect for mounting red-dot optics, magnifiers, and other accessories with 30mm tube diameters to your Picatinny rail.. When using this ring to mount a conventional riflescope, we strongly recommend lapping the rings for a proper and secure fit for your optic.. This Vortex Tactical Ring positions the center of the riflescope tube at a height of 0.97 inches 24.6 mm from the base.. Sold two rings per package..

Use this cantilever mount for mounting 30 mm telescopic sights.. The 2-inch offset of this cantilever mount positions the scope in a forward location, allowing the correct eye relief and head placement.. The cantilever ring mount positions the center of the riflescope tube at a height of 1.59 inches 40.39 mm from the base. Weighs 6.7 ounces. Aluminum construction. Weighs 6.7 ounces.

Vortex Pro 30mm cantilever ring mount provides the correct height and forward placement for proper scope mounting. The cantilever ring mount positions the center of the riflescope tube at a height of 1.435 36.45mm from the base.. Made with pride in the USA.

This quick-release cantilever mount is designed for mounting telescopic sights with 30mm tubes onto a flattop style rifle.. The offset of this cantilever mount positions the scope in a forward location, providing correct eye relief and head placement when used on your rifle.. This mount positions the center of the riflescope tube at a height of 1.45 inches 37 mm from the top surface of the Picatinny base.. The Precision Optic Mount is precision CNC machined from a block of 6061 T6 aluminum and finished in hard coat type 3 mil-spec anodized black for a rock hard lasting finish.. Weighs 8.9 ounces. Made with pride in the USA..

These Vortex Hunter Rings position the center of the riflescope tube at a height of 0.87 inches 22.0 mm from the base.. Mounting to a Picatinny or Weaver type rail, the standard, 2-screw Hunter rings are a nice match for general hunting setups.. Made from aircraft-grade 6061-T6 aluminum for optimum strength.. Sold two rings per package.. Base Clamp Screws25-30 inlbs.

Use this cantilever mount for mounting 34mm tubes. Built-in 20 MOA cant.. These extended cantilevers are designed for mounting scopes with a forward location, providing correct eye relief and head placement.. The cantilever ring mount positions the center of the riflescope tube at a height of 1. 574 40mm from the base..

Slim, low profile design allows the Lo Pro Bubblevel to be mounted on most scopes without removing the scope from the rifle.. Easily visible while maintaining the sight picture.. Mounts quickly and easily to the riflescope tube.. Made in the USA..

Provides extra rail room for rear Back Up Iron Sights BUIS when using the StrikeFire red dot along with the VMX-3T magnifier. The cantilever ring will move the StrikeFire forward about one inch.. Use this cantilever mount in conjunction with the Tactical 30mm Ring to mount the Viper XBR crossbow scope. The 1-inch offset of this cantilever mount positions the scope in a forward location, allowing for correct eye relief and head placement.. Provides absolute co-witness mounting height of 37 mm. Will work with most 30 mm red dot sights..