Top 6 Best Vortex Hunter 1 Inch Rings

This is a 1 inch one piece riflescope rings. Mounting rings are pushed forward 2 for better eye relief.. ADE Cantilever Mount was designed by the experienced merchandise experts and ADE is able to get it from OEM manufacturer to sell at a fraction of cost compare to other brands where purchase this same mount and resale for a lot higher. Our 3-bolt clamping systems with over 6,500 lbs of clamping force hold your scope firmly to the rail. Relief cuts designed into the scope tube bearing surfaces prevent scope pinching and ensure clamping forces are evenly distributed along the top and bottom of the scope body.. The Mount has no protruding levers, bolts, or knobs to rap your knuckles, or get caught on clothing, gear, and surroundings. Height 1.5. Weight 6oz. Screw Torque - 15 in-lbs. We are so confident in these mounts they are covered under our excellent Lifetime Warranty..

These Vortex Hunter Rings position the center of the riflescope tube at a height of 0.87 inches 22.0 mm from the base.. Mounting to a Picatinny or Weaver type rail, the standard, 2-screw Hunter rings are a nice match for general hunting setups.. Made from aircraft-grade 6061-T6 aluminum for optimum strength.. Sold two rings per package.. Base Clamp Screws25-30 inlbs.

These Vortex Pro Series Rings position the center of the riflescope tube at a height of 0.75 inches 19.05 mm from the base. Sold two rings per package.. The finishing touch to your rifle and optic combination. Pro Series rings combine rock-solid reliability and strength with high quality machining to ensure ultimate accuracy and consistency.. Streamlined, lightweight and durable, these rings use four T-25 Torx-style socket cap screws for secure mounting.. Fits Weaver and Picatinny Rails.. Weight Per Ring 39.9 Grams - 1.41 oz.

Robust 6-screw Tactical Ring is perfect for mounting red-dot optics, magnifiers, and other accessories with 30mm tube diameters to your Picatinny rail.. When using this ring to mount a conventional riflescope, we strongly recommend lapping the rings for a proper and secure fit for your optic.. This Vortex Tactical Ring positions the center of the riflescope tube at a height of 1.18 inches 30.0 mm from the base.. Sold two rings per package..

These Vortex Pro Rings position the center of the riflescope tube at a height of 1. 03 inches 26. 16 mm from the base.. Streamlined, strong and durable, the Pro Rings use four T-15 Torx style socket cap screws for secure mounting of your riflescope. Unique design permits easy installation and removal of the scope intoout of the rings.. Permanently attaches to either Picatinny or Weaver bases. Square-edged crossbolt ensures positive engagement of ring to base.. Precision CNC machined from high strength 6061-T6 aluminum alloy. Durable black matte anodized finish.. Sold two rings per package. Made in USA..

These Vortex Precision Matched Rings position the center of the riflescope tube at a height of 1.00 inches 25.4 mm from the base. Will only work with Picatinny spec mountswill not work with Weaver mounts.. Our Precision Matched Rings are kept in pairs throughout the manufacturing process ensuring perfection from one set to another.. We start with certified USA 7075 T6 billet aluminum and hold it to an extremely tight tolerance of .0005 using our precision Computer Numeric Controlled CNC mill.. These Vortex rings are serialized, vibratory tumbled, hand-bead blasted and finished off with a Type III hard coat anodize.. Sold two rings per package. Hex wrench included. Made in the USA..

Set of detachable medium rings for rifleman riflescopes. Holds the scope's centerline 0.61 in above the top of the mounting base. Precision machined from aircraft-grade aluminum. Provides strength without adding excess weight. Fits scopes with 1 inch maintube. Sport type Hunting.

Vortex Pro 30mm cantilever ring mount provides the correct height and forward placement for proper scope mounting. The cantilever ring mount positions the center of the riflescope tube at a height of 1.435 36.45mm from the base.. Made with pride in the USA.

The 3-12x56 Adjustable Objective Hog Hunter Crossfire II riflescope excels when hunting in the lowest light. The V-Brite reticle and over-sized objective allow hunters to take shots from heavy cover with the utmost confidence in tough light conditions .. The adjustable objective provides image focus and parallax removal to the shooter while anti-reflective, fully multi-coated lenses provide bright and clear views.. With long eye relief and an ultra-forgiving eye box, you'll be able to quickly get a sight picture and acquire your target. The fast focus eyepiece allows quick and easy reticle focusing.. Capped reset turrets are finger adjustable with MOA clicks that can be reset to zero after sighting in.. A single piece tube constructed from aircraft grade aluminum ensures strength and shockproof performance. O-ring sealed and nitrogen purged, the Crossfire II delivers waterproof and fogproof performance..

1.00 inches in height, measured from the center of the rifle scope tube to the bottom plane of the Picatinny rail mount. Monstrum Tactical Precision Scope Rings are precision crafted to a given height specification to match your particular rifle setup and preferred cheek weld. 1 inch diameter rings for mounting standard 1 inch rifle scope tubes. Base is compatible with Picatinny mounting systems Not compatible with Weaver mounts. Available in four heights to match your needs 0.80 inch, 1.00 inch, 1.20 inch, and 1.35 inch.

Perfect for All 21mm Picatinny Weaver RailsModkin 4 Set of Different Heights 1 inch Scope Mount Rings Include 2 Pieces Medium Profile 2 Pieces High Profile In One Package. Our Scope Rings Perfect for All 21mm Standard Picatinny Weaver Rails, Available In Two Styles For Your Choice, A Must Have Scope Rings for Hunting Shooting Perfect for Mounting Most Scopes Which Are In 1 inch 25.4mm Scope Tube.. Hollowed-Out Design Built-In Tape ProtectionDesign In See-Through Style, Provide Potential Visibility For Open Sights, Meanwhile Hollowed-Out Configuration Helps To Release Heavy Duty When Clamping Your Scope. Built-In Tape Inside Per Rings To Prevent From Marring The Scope, Also Prevent Sliding and Holding Position Accurately.. Premium Aircraft Aluminum, Solid DurablePrecision Machining of Aircraft Grade 6061 Aluminum Alloy High Strength Steel In Black Matte Anodizing Finish, Sturdy Lightweight Construction, High Quality, Sturdy Construction, Build No Wobble, Offer Durable Safe Performance In The Field.. Rail Clamp Screw Design Easy To InstallWith 1 Rail Clamp Screw and 2 Scope Clamp Screws Per Side, Ensure Mount Any 1 inch Scope Firmly, Just Twist OnOff The Rail Clamp Screw Nut Via Allen Wrench and Mount The Base On 21mm Rail, Simple and Quick To Remove Or Install. Comes With 2 Pieces Allen Wrench.. 4 Set Of Two Styles 1 inch Scope Rings2 Pieces Medium Profile - 0.5 inch Gap From Base Of Mount To Bottom Of Ring - Item Height 1.9 inch - Dimension 1.9 x 1.6 x 0.8 Inch - Weight 2 Ounce Per Ring 2 Pieces High Profile - 0.71 inch Gap From Base Of Mount To Bottom Of Ring - Item Height 2.0 inch - Dimension 2.0 x 1.6 x 0.8 Inch - Weight 2 Ounce Per Ring..