Top 6 Best Vortex Rings

This is a 1 inch one piece riflescope rings. Mounting rings are pushed forward 2 for better eye relief.. ADE Cantilever Mount was designed by the experienced merchandise experts and ADE is able to get it from OEM manufacturer to sell at a fraction of cost compare to other brands where purchase this same mount and resale for a lot higher. Our 3-bolt clamping systems with over 6,500 lbs of clamping force hold your scope firmly to the rail. Relief cuts designed into the scope tube bearing surfaces prevent scope pinching and ensure clamping forces are evenly distributed along the top and bottom of the scope body.. The Mount has no protruding levers, bolts, or knobs to rap your knuckles, or get caught on clothing, gear, and surroundings. Height 1.5. Weight 6oz. Screw Torque - 15 in-lbs. We are so confident in these mounts they are covered under our excellent Lifetime Warranty..

These Vortex Pro Series Rings position the center of the riflescope tube at a height of 1. 0 Inches 25. 4 mm from the base. Sold two rings per package.. The finishing touch to your rifle and optic combination. Pro Series rings combine rock-solid reliability and strength with high quality machining to ensure ultimate accuracy and consistency.. Streamlined, lightweight and durable, these rings use four T-25 Torx-style socket cap screws for secure mounting.. Fits Weaver and Pica tinny Rails. Weight Per Ring 48. 7 Grams - 1. 72 oz.

These Vortex Precision Matched Rings position the center of the riflescope tube at a height of 0.97 inches 24.64 mm from the base. Will only work with Picatinny spec mountswill not work with Weaver mounts.. Our Precision Matched Rings are kept in pairs throughout the manufacturing process ensuring perfection from one set to another.. We start with certified USA 7075 T6 billet aluminum and hold it to an extremely tight tolerance of .0005 using our precision Computer Numeric Controlled CNC mill.. These Vortex rings are serialized, vibratory tumbled, hand-bead blasted and finished off with a Type III hard coat anodize.. Sold two rings per package. Hex wrench included. Made in the USA..

These Vortex Hunter Rings position the center of the riflescope tube at a height of 0.87 inches 22.0 mm from the base.. Mounting to a Picatinny or Weaver type rail, the standard, 2-screw Hunter rings are a nice match for general hunting setups.. Made from aircraft-grade 6061-T6 aluminum for optimum strength.. Sold two rings per package.. Base Clamp Screws25-30 inlbs.

Use this cantilever mount for mounting 30 mm telescopic sights.. The 2-inch offset of this cantilever mount positions the scope in a forward location, allowing the correct eye relief and head placement.. The cantilever ring mount positions the center of the riflescope tube at a height of 1.59 inches 40.39 mm from the base. Weighs 6.7 ounces. Aluminum construction. Weighs 6.7 ounces.

Robust 6-screw Tactical Ring is perfect for mounting red-dot optics, magnifiers, and other accessories with 30mm tube diameters to your Picatinny rail.. When using this ring to mount a conventional riflescope, we strongly recommend lapping the rings for a proper and secure fit for your optic.. This Vortex Tactical Ring positions the center of the riflescope tube at a height of 0.97 inches 24.6 mm from the base.. Sold two rings per package..

These Vortex Pro Rings position the center of the riflescope tube at a height of 0. 78 inches 19. 81 mm from the base.. Streamlined, strong and durable, the Pro Rings use four T-15 Torx style socket cap screws for secure mounting of your riflescope. Unique design permits easy installation and removal of the scope intoout of the rings.. Permanently attaches to either Picatinny or Weaver bases. Square-edged crossbolt ensures positive engagement of ring to base.. Precision CNC machined from high strength 6061-T6 aluminum alloy. Durable black matte anodized finish.. Sold two rings per package. Made in USA..

Maximize the efficiency of magnification transitions with fluid precision using Vortex's SV-2 Switchview Throw Lever. Compatible with riflescope magnification rings with a diameter of 1.739 inches 44 mm.. Constructed of skeletonized, lightweight hard-anodized aluminum, the SV-2 is one tough accessory that will serve you well. The Switchview attaches and detaches easily to the magnification ring.. Compatible with Razor HD riflescopes with a rubber magnification ring, Viper riflescopes with a metal magnification ring HS-T, HS LR, HS models,Viper XBR crossbow scope, and Strike Eagle 1-8x24 riflescope..

Use this cantilever mount for mounting 34mm tubes. Built-in 20 MOA cant.. These extended cantilevers are designed for mounting scopes with a forward location, providing correct eye relief and head placement.. The cantilever ring mount positions the center of the riflescope tube at a height of 1.574 40mm from the base..

Provides extra rail room for rear Back Up Iron Sights BUIS when using the StrikeFire red dot along with the VMX-3T magnifier. The cantilever ring will move the StrikeFire forward about one inch.. Use this cantilever mount in conjunction with the Tactical 30mm Ring to mount the Viper XBR crossbow scope. The 1-inch offset of this cantilever mount positions the scope in a forward location, allowing for correct eye relief and head placement.. Provides absolute co-witness mounting height of 37 mm. Will work with most 30 mm red dot sights..