Top 6 Best Water Pressure Regulator For Drip Irrigation

Maintains optimum 25 psi pressure and water flow to Drip lines and emitter devices. Connects to any 34 male pipe threaded faucet, garden hose or component. 20 gallon per minute flow through capacity. Durable, robust design provides reliable operation. Constructed of highly durable UV and chemical-resistant materials. For automated watering add a reliable Rain Bird professional-grade hose end timer Amazon ASIN B006JZ514U sold separately.

Maintains water pressure between 20-30 psi 25 psi nominal. 0-6.5 GPM gallons per minute flowrate. Maximum Inlet Pressure 150 psi. Note As with most drip system pressure regulators, the outlet pressure might slowly build up above 30 psi if the outlet is completely shut.. Inlet Size FHT female hose thread. Outlet Size MHT male hose thread. Connects to a standard hose bib or garden hose in USA and Canada.. It may be connected to an automated timer, backflow preventer, or filter, if desired. The regulator body is made of solid lead-free brass which contains less than 0.25 lead.. Upgrade your plastic regulator to this durable, heavy duty lead-free brass regulator. It is able to withstand a higher inlet pressure compared to a typical plastic regulator and is impervious to sunlight.. Note Some garden hoses are made with aluminum fittings. To avoid galvanic corrosion, do not connect this regulator to aluminum fittings for prolonged period of time..

Ideal for installations requiring lower flows such as solid set, drip line, soaker hose and other low pressure agriculture, residential and commercial irrigation. This PRLG Pressure Regulator Landscape Grade maintains a constant outlet pressure of 25 PSI 1.72 bar with a flow range between 0.5 - 7 GPM 114 - 1590 Lhr.. 100 water tested for accuracy. Senninger pressure regulators are built to rigorous quality standards and are known worldwide for their reliable performance.. Proper use of this low flow water regulator maintains sprinkler or droplet flow, distribution uniformity, and the overall efficiency of an irrigation system. It also helps conserve water and energy and extend sprinkler and drip system life in your garden or nursery. Works with any standard 34 outdoor faucet, hose bib, garden hose, water hose, sprinkler manifold, garden soaker hose or home irrigation system.. Made in the USA of engineering-grade thermoplastics. This sturdy inline plastic water regulator can be installed above or below ground. No external metal parts for excellent corrosion resistance.. Important note This irrigation pressure regulator regulates dynamic water pressure the pressure while water is flowing. If measuring this regulator with a pressure gauge, do not screw the gauge directly onto the end of the regulator. This blocks the flow of water and measures static pressure, not dynamic pressure. To measure dynamic water pressure, attach a gauge at the end of your irrigation tubing line, or use an inline gauge that allows water to flow unblocked through the regulator..

Maintains water pressure between 20-30 psi 25 psi nominal. 0-6.3 GPM gallons per minute flowrate. Maximum Inlet Pressure 155 psi. Note As with most drip system pressure regulators, the outlet pressure might slowly build up above 30 psi if the outlet is completely shut.. Inlet Size FHT female hose thread. Outlet Size MHT male hose thread. Connects to a standard hose bib, spigot, or garden hose in USA and Canada.. It may be connected to an automated timer, backflow preventer, or filter, if desired. The regulator body is made of solid lead-free brass which contains less than 0.25 lead.. Upgrade your plastic regulator to this durable, heavy duty lead-free brass regulator. It is able to withstand a higher inlet pressure compared to a typical plastic pressure regulator. Its all metal lead-free brass exterior is impervious to sunlight.. Note Some garden hoses are made with aluminum fittings. To avoid galvanic corrosion, do not connect this regulator to aluminum fittings for prolonged period of time..

Moistenland 25 PSI preset pressure regulators hose thread are used to reduce and regulate the incoming pressure of a households water entering a drip irrigation or micro sprinkler system to the appropriate operating pressure of 25 PSI.. High-strength ABS construction for durability, available with 34 female hose thread to fit all standard hose or pipe thread connections. Inlet Size FHT female hose thread. Outlet Size MHT male hose thread. It may be connected to an automated timer, backflow preventer, or filter, if desired.. This 25 psi pressure reducer regulator is ideally suited for use with drip systems, drip lines, and emitters, or any application where low water pressure is desired. Its 34 inch hose thread is designed to connect to a standard hose bib and garden hose in the USA..

15 PSI Pressure Regulators the 15 PSI preset pressure regulators are designed to reduce and regulate incoming water pressure, ensuring a precise operating pressure of 15 PSI for drip irrigation and micro sprinkler systems With an inlet size of FHT and outlet size of MHT, they easily connect to standard outdoor faucets, water hose or irrigation systems. 12'' Drip Irrigation Tubing Adapters easily connect 12 drip irrigation tubing to any standard 34 faucet, hose bibb, or garden hose with our drip irrigation tubing adapters The 34 female hose thread to 12 tubing connector ensures a snug fit, and the installation process is quick and requires no tools, making it convenient for all users. Robust Construction crafted with high strength ABS material, these drip irrigation parts ensure durability and reliability The 34 female hose thread allows compatibility with standard hose or pipe thread connections, ideally suited for use with drip systems, drip lines, and emitters, or any application where low water pressure is desired. No Leakage Faucet Hose Connector lock fitting with barbed design ensures tubing will not slip out or blow off at high pressure and temperature Each fitting comes with a pre installed rubber washer for a water tight seal, ensuring a no leak connection. Water Conservation and System Maintenance proper use of the 15 PSI pressure reducer regulator helps maintain optimal sprinkler or droplet flow, distribution uniformity, and overall irrigation system efficiency It contributes to water and energy conservation, extending the life of sprinklers and drip systems The 12 inch tubing adapters are perfect for installations requiring lower flows, such as drip line, soaker hose, and other low pressure agricultural and irrigation systems.

Maintains water pressure between 20-30 psi 25 psi nominal. 0-6.8 GPM gallons per minute flowrate. Maximum Inlet Pressure 145 psi.. Inlet Size FHT female hose thread. Outlet Size MHT male hose thread. Connects to a standard hose bib or garden hose in USA and Canada.. It may be connected to an automated timer, backflow preventer, or filter, if desired. The regulator body is made of solid lead-free brass which contains less than 0.25 lead.. Upgrade your plastic pressure regulator to this durable, heavy duty lead-free brass pressure regulator. It is able to withstand a higher inlet pressure compared to a typical plastic regulator and is impervious to sunlight.. Note Some garden hoses are made with aluminum fittings. To avoid galvanic corrosion, do not connect this regulator to aluminum fittings for prolonged period of time..

Precise pressure regulation The 25 psi pressure regulator specifically designed for drip irrigation systems regulates the water pressure to a constant 25 psi, ensuring accurate water delivery to each plant with minimum waste of water.. Easy installation The 25 psi pressure regulator is a simple device with easy to fit any 34 inch hose thread connections that can be incorporated into most drip irrigation systems.. Durable material The pressure regulator is typically made from high-strength, UV-resistant plastic materials that provide longevity to the device in even the toughest outdoor environments.. Reduced water waste A regulated pressure will prevent water from escaping too quickly or forcefully from the system, reducing the risk of water waste and run off.. Longer system life By reducing the amount of pressure in the system, you may extend the life of your drip irrigation components. This can help save you money over time by reducing the need for frequent repairs or replacement parts..

Maintains water pressure between 20-30 psi 25 psi nominal. 0-7 GPM gallons per minute flowrate. Maximum Inlet Pressure 140 psi. Note As with most drip system pressure regulators, the outlet pressure might slowly build up above 30 psi if the outlet is completely shut.. Inlet Size FHT female hose thread. Outlet Size MHT male hose thread. Connects to a standard hose bib or garden hose in USA and Canada.. It may be connected to an automated timer, backflow preventer, or filter, if desired. The regulator body is made of solid lead-free brass which contains less than 0.25 lead.. Upgrade your plastic regulator to this durable, heavy duty lead-free brass regulator. It is able to withstand a higher inlet pressure compared to a typical plastic regulator. Its all metal lead-free brass exterior is impervious to sunlight.. Note Some garden hoses are made with aluminum fittings. To avoid galvanic corrosion, do not connect this regulator to aluminum fittings for prolonged period of time..

25 PSI preset pressure regulators hose thread are used to reduce and regulate the incoming pressure of a households water entering a drip irrigation or micro sprinkler system to the appropriate operating pressure of 25 PSIPressure Compensation Range 30-100 PSI.. High-strength ABS construction for durability, available with 34 female hose thread to fit all standard hose or pipe thread connections. Inlet Size FHT female hose thread. Outlet Size MHT male hose thread. It may be connected to an automated timer, backflow preventer, or filter, if desired.. This 25 psi pressure reducer regulator is ideally suited for use with drip systems, drip lines, and emitters, or any application where low water pressure is desired. Its 34 inch hose thread is designed to connect to a standard hose bib and garden hose in the USA.. Suitable for retro-fitting sprinkler zones, faucet, hose, or gravity feed - For installation above grade, in a Bubbler Box or in a green house.