Top 6 Best Zircon Stud Finder Wall Scanner

Finds the center, edges, and direction of wood and metal studs up to 2 in. 50 mm deep. Thermally detects actively heated 12 in. diameter water-filled pex tubing up to 2 in. deep. Find and map live unshielded electrical AC wiring up to 2 in. deep. Backlit LCD screen and patented ergonomic pivot pinch grip for comfortable scanning and viewing from all angles. Low battery indicator for optimum performance.

Locates the edges and center of wood or metal studs up to 1 12-Inches 38 mm deep. Scans for metal and live AC wires. Easy-to-read LCD display, audio tone, and the patented SpotLite Pointing System indicate stud center. WireWarning detection indicates the presence of live, unshielded electrical wiring up to 2 deep.

The item is Zircon StudSensor Pro SL Edge Finder Deep-Scanning Stud Finder with SpotLite Pointing System. Used for Test Measurement, Rotary Lasers. The product is manufactured in China. zStud Scan mode locates the edges of wood or metal studs up to inch 19 mm deepDeepScan mode doubles the scanning depth to 1 inches 38 mm. Red LEDs light up every time a stud edge is approached.. Patented SpotLite Pointing System, an audio alert, and a green LED signals when the stud edge is reached.. Should scanning begin over a stud, Zircon's patented over-the-stud indicator alerts the user to start the scan in a new location..

Locates the edges of wood or metal studs up to 34-Inch 19 mm deep. DeepScan mode doubles the scanning depth to 1-12-inch. WireWarning detection indicates the presence of live wire up to 2. Easy-to-read LCD display indicates when a stud edge is approached. Updated spotLite pointer shines an arrow-shaped light on the wall to mark the target.

AUDIBLE ALERTS The sensor pings any time you hit the center of a stud. STUD DETECTION Can locate the edges and center of wooden or metal studs up to 1 12 inches deep. LIVE WIRE DETECTION An alert pops up in the corner of the display whenever the system detects electrical currents up to 2 inches under the surface. LCD DISPLAY indicates when you are nearing the edge and center of a stud. It also tells you when re-calibration is necessary. SPOTLIGHT Visual cues in the form of a glowing arrow aid you in finding the location of metal and wooden studs.

Ergonomically designed grip allows a comfortable hold on the tool for any size hand, at any angle. ACT Auto Correcting Technology automatically corrects common user errors, i.e. when scanning begins over a stud, as the Signal Strength Indicator help distinguish shallower targets from deeper ones. One fully charged 9V battery, not included, is required for the stud scanner to run at optimal performance to help you easily find studs, metal and live AC wiring while avoiding electrical hazards.

Detection The Bosch GMS120 Digital Wall Scanner features multi-mode laser detection for wood studs, metal objects rebar, studs and steelcopper pipes and live wiring. Performance Features the latest 3 sensor laser technology, offering a wide range of detection performance of up to 4 34 inches deep in cured concrete, up to 2 inches for live wiring, up to 3 18 inches for copper and up to 1 12 inches for wood studs The accuracy of the product is 0.0625. Self calibrating Includes 3 selection modes for wood, metal, and AC wiring The GMS120 offers automatic calibration from the start and continues to self calibrate through the course of the project for easy and precise detection. Display Features an illuminated graphical LCD display to indicate mode, detection strength, and more The large detection ring flashes green for no object found, orange for object near and red for object found within the sensor range. Center Finder This wall scanner includes a center finder that pinpoints the object center with an audible detection signal with an onoff button.

Find ferrous and non-ferrous metal up to 6 in. 152 mm deep in concrete and other non-metallic surfaces. Automatically differentiates between magnetic metal such as rebar and non-magnetic metal such as copper pipe. Shows the depth of metal from the surface in both inches and centimeters. Helps map out the grid of metal through any nonmetallic construction material, including concrete, tile, and marble. Ideal for finding andor avoiding rebar, cables, pipe, nails in reclaimed wood, nailstacks in studs behind lath plaster walls, electrical boxes and conduit, and more.

Locates ferrous magnetic metal behind walls up to 4-Inch 102 mm deep and non-ferrous non-magnetic metal up to 2-Inch 51 mm deep. Quickly and easily detects metal in wood, drywall, paneling, tile, stucco, plaster, concrete and other non-metallic surfaces. Works as a great stud finder for plaster walls, as well as finding rebar in concrete. Easily finds plumbing, ductwork, rebar, nails and screws in your walls, floors and ceilings. Quickly and easily detects metal in wood, drywall, paneling, tile, stucco, plaster, concrete and other non-metallic surfaces.